ebay item

[dickymint]

I really want this but ive got a feeling its gonna go for really silly money!especially now ive blown the lid on it

[zorro]

Er....do we have to guess what it is ?

[dickymint]

zorro said:

Er....do we have to guess what it is ?

ooops forgot the link..well spotted Zorro.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2473575533&category=22797

[Planman350i]

what about these then:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2473227835&category=28648

Too big for my little wedge but cheap at mo!

[jmorgan]

I have a part's jobbie I bought from the club years ago. Tasmin to first 350's. And I am keeping it.

[seamus]

Bought a copy from Hans Daalhuisen - if I remember correctly he was selling them a while ago, may still have a few left..

[dickymint]

FORTY FIVE quid!!!!!!!!!!!!!!!!!!!

[jchase]

I have scanned the entire 1986 Parts Manual @ 1200 DPI. I didn't see a single Copyright notice...

Anyone want to swap a copy for some 280i bits to get my FHC going, since it failed its MOT today. I got a record 3000 ppm HC, 16% O2, but only 0.1% CO... Oh yeah, and the rear bearings failed too. I seem to have one alloy hub carrier and one welded steel one. I noticed in the parts book it said to replace both together, as the alloy bit was NLA...

-Jim

[dickymint]

jchase said:

I have scanned the entire 1986 Parts Manual @ 1200 DPI. I didn't see a single Copyright notice... Anyone want to swap a copy for some 280i bits to get my FHC going, since it failed its MOT today. I got a record 3000 ppm HC, 16% O2, but only 0.1% CO... Oh yeah, and the rear bearings failed too. I seem to have one alloy hub carrier and one welded steel one. I noticed in the parts book it said to replace both together, as the alloy bit was NLA... -Jim

I noticed you put a bid in for it Jim.
The one you got, does it include the 420SEAC or is it one year too early?

You must've put a hell of a lot of work into your 280 to even get it to the garage let alone pass
Good luck next time

[jchase]

Well, I borowed the Manual off a good friend of mine ( who is gonna read this in a few minutes no doubt) , but the front page is all that appears to be missing, and I don;t mind getting a copy to make the scan complete, but not at £45! (Is there a front page ?). Oh yes, it covers the 420 SEAC, but wierdly not the 2+2 fuel tank in my early Tasmin.

Yes, there was quite a bit of work involved to get the car to the MOT place. On the bright side the MOT guy said the chassis was in really good shape, so that's something I guess.

-Jim

[Streaky]

Just bought a copy in a BiN offer on e-bay for £20.00:

Suspect there will be more to come - Streaky