swirl pot advice ...please

[Mike Brewer]

ok guys .took my swirl pot to a friend cut open pot filter was loose .swirl pot very clean inside .reading back through your advice .just to be sure ...use a pre filter before the pot Or do I stick with the filter inside pot .Which will be repaired and reused thanks .also where is the best place to renew the large filter after the pump .Thanks .

[mrzigazaga]

Hi Mike...If the mesh one in the pot is good then you could chance it...A pre-filter is a safe bet though...

RT sells these pre-filters for the Wedge...He also does the EFI V8 classic fuel filter...
http://www.ebay.co.uk/itm/FUEL-PUMP-PRE-FILTER-TVR...

https://www.google.co.uk/url?sa=i&rct=j&q=...

I generally use these guys ..The part number is STC1677...
https://www.google.co.uk/url?sa=t&rct=j&q=...

Hope this helps


Ziga

[adam quantrill]

The prefilter would go after the pot before the pump - or else you will need two! ;^)

These ones are reasonable value... get the 12mm barb inlet one.

http://www.ebay.co.uk/itm/IN-LINE-FUEL-FILTER-Petr...

Edited by adam quantrill on Tuesday 5th January 11:45

[Mike Brewer]

Thankyou both for your help .Mike