Rover V8 sprintex supercharger
Discussion
It looks like a good start but the pictures don't show (and you will need):
crank pulley
front of blower small pulley
idler pulley
a drive belt
supercharger oil reservoir
intake pipe
short rubber pipe joining blower to plenum
some big jubilee clips
a bracket to mount the AFM upstream of the intake/throttle assembly
I'm not sure whether the pulley/pump thing will be useful either.
Nice to have the throttle extension bit.
crank pulley
front of blower small pulley
idler pulley
a drive belt
supercharger oil reservoir
intake pipe
short rubber pipe joining blower to plenum
some big jubilee clips
a bracket to mount the AFM upstream of the intake/throttle assembly
I'm not sure whether the pulley/pump thing will be useful either.
Nice to have the throttle extension bit.
Hi mate...The Sprintex uses an external reservoir although they can be tapped into the engine oil...Ziga
Just noticed that one end of the unit is open to foreign bodies...Not good TBH unless its been kept clean...The last thing you want in there is grit...
Just noticed that one end of the unit is open to foreign bodies...Not good TBH unless its been kept clean...The last thing you want in there is grit...
Edited by mrzigazaga on Monday 29th February 23:18
Forums | Wedges | Top of Page | What's New | My Stuff




