Tvr wedge fhc trim part
Discussion
Good morning I'm after some help if possible. I'm trying to help an owner out in the US who needs some parts.
He's after the trim which goes on the b post on the outside.
I have a driver's side one but not the passenger side side.
He's tried appealing on the face ache sites but no one seems to have one. Can anyone help?
Or does anyone know someone who could make one from fibreglass if it sent them the one off my own car to be used as a pattern?
Thx
Mike
He's after the trim which goes on the b post on the outside.
I have a driver's side one but not the passenger side side.
He's tried appealing on the face ache sites but no one seems to have one. Can anyone help?
Or does anyone know someone who could make one from fibreglass if it sent them the one off my own car to be used as a pattern?
Thx
Mike
The B pillar trims were Unicorn-dung rare even when I had my Tasmin in the late 90s - my car had one crafted from aluminium!
You could try Track v Road as I know they've built a few wedge racecars (including what was mine), maybe they have some odd bits.
It'd be relatively simple to take a mould from an existing one but be aware that sometimes the original part doesn't escape damage in the process, even if it's only paintwork.
Otherwise try Graham Walden at Black Cat, or one of the rip-off breakers.
You could try Track v Road as I know they've built a few wedge racecars (including what was mine), maybe they have some odd bits.
It'd be relatively simple to take a mould from an existing one but be aware that sometimes the original part doesn't escape damage in the process, even if it's only paintwork.
Otherwise try Graham Walden at Black Cat, or one of the rip-off breakers.
Forums | Wedges | Top of Page | What's New | My Stuff