Not Enough Air
Not Enough Air
Author
Discussion

db800

Original Poster:

200 posts

314 months

Friday 3rd August 2012
quotequote all
Having problems in starting.
Turn over engine and it will kick once and then flood sbut if you pull the hose from AFM to plenum back just a little will run (not enough air ) Have tried diffrent AFM,ECU, cold start sensor any idea's would be welcome.

Cheers db

carob

3,585 posts

242 months

Friday 3rd August 2012
quotequote all
Thats it David its knackered, you may as well sell it, How much would you like for it.........

Checf for splits in the hoses and the one from the AFM to Plenum you could be nipping it closed when pulling back on it.

Rob


Wedg1e

27,046 posts

296 months

Friday 3rd August 2012
quotequote all
Pull half the injector connectors off each bank. If it starts and chugs away then it's overfuelling.
Disconnect the cold start injector, you don't need it.
Plug a pressure gauge (0-5 Bar will do) into the stub hose that feeds the CSI, that'll tell you all sorts of things about the injection system.

Convert

3,757 posts

249 months

Friday 3rd August 2012
quotequote all
Pull the plug from the Cooolant temp sensor and bridge it out. Does it start then>

vampire222

433 posts

180 months

Friday 3rd August 2012
quotequote all
clean the air bypass galley thing for idle, thats usually full of muck and making life hard for your engine.

aka clean all the intake stuff!

Tasmin200

1,388 posts

218 months

Tuesday 7th August 2012
quotequote all
You got it going yet David?

db800

Original Poster:

200 posts

314 months

Tuesday 7th August 2012
quotequote all
Hi Roy, no just not had the time to go out and play with things and I have already tried the above tips .
Thanks for all your comments when I have the time IT WILL GO.