Reverse light switch
Discussion
Finally found all of the wires which had been disconnected from the gearbox. Now I know why they were as they were (I think that makes sense!)
The reverse lights stay on whenever the ignition is on. I have checked my wiring and belive it to be correct.
Does any one know the part number for a new switch and where to get one?
Also any idea how to get the old one out?
I am attacking it from underneath due to the lack of access from the top, and can't actually see it, so fumbling in the dark and regularly burning myself with the lead lamp.
Thanks for your help,
Mike
PS I am trying to organise a day out in Brighton in the general section, www.pistonheads.com/gassing/topic.asp?t=278356&f=13&h=0
Would be good to get a turn out of Wedges????!!!!!!
Let me know!
The reverse lights stay on whenever the ignition is on. I have checked my wiring and belive it to be correct.
Does any one know the part number for a new switch and where to get one?
Also any idea how to get the old one out?
I am attacking it from underneath due to the lack of access from the top, and can't actually see it, so fumbling in the dark and regularly burning myself with the lead lamp.
Thanks for your help,
Mike
PS I am trying to organise a day out in Brighton in the general section, www.pistonheads.com/gassing/topic.asp?t=278356&f=13&h=0
Would be good to get a turn out of Wedges????!!!!!!
Let me know!
Take out the centre console/armrest and remover the gear lever surround and rubber giter. You should then have enough room to loosen the lock-nut and wind out the switch until the light goes out.
Unless it's like mine and totally buggered, then you take it out and leave it on the work bench to change "later"
Unless it's like mine and totally buggered, then you take it out and leave it on the work bench to change "later"

Forums | Wedges | Top of Page | What's New | My Stuff



