New wedge owner
New wedge owner
Author
Discussion

CHJ

Original Poster:

781 posts

242 months

Wednesday 19th July 2006
quotequote all

After looking at a few Wedges I finally found one that I wanted to buy and collected it on Sunday ... a C plate 350i in red (via pistonheads classifieds).... needs a bit of work doing here and there, but negotiated an appropriate discount .

Made it all the way home (150miles) without any probs.


I'm sure I will have lots more questions, but the car has always been run with 4 star/LRP ... can I just switch to superunleaded without making any changes or using additive?

Thanks for your help

wedg1e

27,035 posts

294 months

Wednesday 19th July 2006
quotequote all
Might just need to shift the ignition advance a bit to compensate... but the RV8 is a very tolerant lump anyway.... and they're all different, so experiment to see what's best for yours.

Oh, and welcome

beacon

1,144 posts

250 months

Wednesday 19th July 2006
quotequote all
Hi Chris ,congrats on your wedge purchase ,it's been months since I got mine and I am still beaming .Get a photo of it on your profle so we can see ..Welldone
Al

Edited by beacon on Wednesday 19th July 14:23

convert

3,757 posts

247 months

Wednesday 19th July 2006
quotequote all
Was it the one that Jerry was selling in Essex by anychance?

And if so did you manage to get the bonnet open!

tallbloke

10,376 posts

312 months

Wednesday 19th July 2006
quotequote all
All injection RV8 lumps have hardened valve seats and will run ordinary cooking unleaded just fine if the ignition timing is set appropriately. You may get a small performance/idling improvement by using super unleaded if you are running a particularly high compression/lumpy cam but there is no need to use LRP/4* or any additives.

Oh, and welcome to wedgedom

Edited by tallbloke on Wednesday 19th July 15:08

badredwedge

3,450 posts

257 months

Wednesday 19th July 2006
quotequote all
Welcome to the Mad house Chris

l33

3,469 posts

253 months

Wednesday 19th July 2006
quotequote all
Welcome fellow wedger.
It's all fun and frollics in here and were all normal people - honest

CHJ

Original Poster:

781 posts

242 months

Wednesday 19th July 2006
quotequote all
convert said:
Was it the one that Jerry was selling in Essex by anychance?

And if so did you manage to get the bonnet open!



No. It was the recent one in Newhaven, Sussex.... C706FON
It needs tlc in places (having the outriggers replaced next week and chassis waxed) but I managed to negotiate these things off the price - and its all part of the fun. Hoping to get the original seats retrimmed soon, and I'll do the hood at some time - not that I'll probably ever use it .

CHJ

Original Poster:

781 posts

242 months

Wednesday 19th July 2006
quotequote all
tallbloke said:
All injection RV8 lumps have hardened valve seats and will run ordinary cooking unleaded just fine if the ignition timing is set appropriately. You may get a small performance/idling improvement by using super unleaded if you are running a particularly high compression/lumpy cam but there is no need to use LRP/4* or any additives.

Oh, and welcome to wedgedom

Edited by tallbloke on Wednesday 19th July 15:08


Thanks for the info, I think I will just try the ordinary cooking stuff and see what happens.

I love wedgedom already, I haven't switched the stereo on yet ... it's that unbeatable exhaust burble ...

wedgtable

317 posts

255 months

Wednesday 19th July 2006
quotequote all
CHJ said:
convert said:
Was it the one that Jerry was selling in Essex by anychance?

And if so did you manage to get the bonnet open!



No. It was the recent one in Newhaven, Sussex.... C706FON
It needs tlc in places (having the outriggers replaced next week and chassis waxed) but I managed to negotiate these things off the price - and its all part of the fun. Hoping to get the original seats retrimmed soon, and I'll do the hood at some time - not that I'll probably ever use it .



10 minutes from me, if I'd known I would have come and had a look with you.
Actually, I think the guys name is Russ? I have met him before about a year and half a go. Good Bloke.

Welcome and enjoy, it will be worth the journey!!

Mike

convert

3,757 posts

247 months

Wednesday 19th July 2006
quotequote all
CHJ said:
tallbloke said:
All injection RV8 lumps have hardened valve seats and will run ordinary cooking unleaded just fine if the ignition timing is set appropriately. You may get a small performance/idling improvement by using super unleaded if you are running a particularly high compression/lumpy cam but there is no need to use LRP/4* or any additives.

Oh, and welcome to wedgedom

Edited by tallbloke on Wednesday 19th July 15:08


Thanks for the info, I think I will just try the ordinary cooking stuff and see what happens.


Welcome to the mad mad world of Wedges.

I love wedgedom already, I haven't switched the stereo on yet ... it's that unbeatable exhaust burble ...

silverback mike

11,293 posts

282 months

Wednesday 19th July 2006
quotequote all
Hello fella

CHJ

Original Poster:

781 posts

242 months

Thursday 20th July 2006
quotequote all
[quote]

10 minutes from me, if I'd known I would have come and had a look with you.
Actually, I think the guys name is Russ? I have met him before about a year and half a go. Good Bloke.

Welcome and enjoy, it will be worth the journey!!

Mike[/quote]

Yep, that's right - Russ is his name, and he is a good bloke ... came and picked me up from the station in Brighton, got the car reMOT'd without me asking, so no complaints at all.

Bought himself an M3 cabrio, hence the change.

TVR-NUT

1,404 posts

283 months

Thursday 20th July 2006
quotequote all
Hello and welcome to the forum and the wonderful world of wedges CHJ.

Mark

combine

3,114 posts

258 months

Thursday 20th July 2006
quotequote all
Even if you do switch on the radio it will need max vol and then some.