Wanted tired dash for 350i - square clocks

[schimg]

Here we go again!

Took the very tired dash out of my 1984 Wedge, it was a plywood job had split ...was hoping that it was the type that has the metal backing so that I could cover or clean it up..obviously wasn't!

So anyone got a spare or tired one, Blaine tells me that there are two types one with a square (time) clock...which is the one that I require and ones with round clocks.

Cheers

Steve

[L33]

Steve,
Try the guy your getting your bumpers off.

[kfozz]

If you are anywhere near J34 of the M62 at any time I have the dash out of my old Tasmin you can have free, not in bad condition but no instruments.

Keith

[schimg]

kfozz said:

If you are anywhere near J34 of the M62 at any time I have the dash out of my old Tasmin you can have free, not in bad condition but no instruments.

Keith

Keith,

Thanks for the offer appreciated, my instruments are appear fine just a little tired in need of a clean up, I take it yours has the square timepiece then?

If so I will do my best to get up there, I could drop you an email to get the address have a mate that is up that way pretty on a pretty regular basis.

reagards,

Steve

[schimg]

L33 said:

Steve,
Try the guy your getting your bumpers off.

Have dropped an email to Andy..probably busy with Christmas stuff...did you get my text about that shiny part?

[blaineuk]

put i length of 1"x11/2 along the back, wrap in cardboard and post, should be no more then £6.

[schimg]

blaineuk said:

put i length of 1"x11/2 along the back, wrap in cardboard and post, should be no more then £6.

thanks Blaine,

This sounds like an easier option...what are your thoughts Keith?

I would obviously cover any costs...

[Mr Tank]

Hi

Sent two dash's by post the same way, both arrived OK!

[Gandalf]

Steve Re Dash Veneering I have sent you mail

[L33]

schimg said:

L33 said:

Steve,
Try the guy your getting your bumpers off.

Have dropped an email to Andy..probably busy with Christmas stuff...did you get my text about that shiny part?

Got the text Steve - No worries.

[schimg]

Gandalf said:

Steve Re Dash Veneering I have sent you mail

thanks Steve

[schimg]

Mr Tank said:

Hi

Sent two dash's by post the same way, both arrived OK!

Andy,

Thanks for this sounds the best route...any sign of a date for collection of them there bits?

[schimg]

L33 said:

schimg said:

L33 said:

Steve,
Try the guy your getting your bumpers off.

Have dropped an email to Andy..probably busy with Christmas stuff...did you get my text about that shiny part?

Got the text Steve - No worries.

Good man...appreciated!

Love it when a plan comes together

[schimg]

kfozz said:

If you are anywhere near J34 of the M62 at any time I have the dash out of my old Tasmin you can have free, not in bad condition but no instruments.

Keith

Keith,

Good to speak with you today...pity the dash isn't a metal jobbie, thanks for the offer in the first place, appreciated.

So has anyone else got an olf tired metal dash for a 350i with the square type of time clock?