Chassis Paint - South
Discussion
islander said:
When I say borrow, i really mean come and use as it could be difficult to take away with you!
Couldn't you just dig it up and take it away? I mean, it wouldn't take up much space, it's only a hole. Indeed it should fit in the boot of a Wedge, especially if you fold it up the right way 
- Streakymatt-man said:
Anyone got a 4 post lift or a pit in their garage they want to loan for a few hours for me to paint the chassis?
Really needs to be done and last time on axle stands i got a face full of crap/paint and didnt do as good a job as i wanted!
Beer offered
A few hours,Really needs to be done and last time on axle stands i got a face full of crap/paint and didnt do as good a job as i wanted!
Beer offered
Took me a few days and that was with the body off.
But I did take it all down to bare metal.
you may want to think about using POR15, but you don't want to get that in your face, also your need to remove any grease and flaky paint.
All depends on how long you want it to last.
TVRleigh_BBWR said:
If it can wait 6-12 month's I'll be quiting my day job, and doing TVR Repairs and tuning. Inc body off restorations.
If it goes through the MOT today I may very well take you up on that Leigh - I have had it checked a couple of times and been told it is all solid but has some surface shyt on it. I also have a tin of POR15 on standby for the job when I was foolish enough to think I might do this myself 
suppose it is too early to get an estimate numbers wise?Edited by PR350 on Friday 25th April 11:56
PR350 said:
TVRleigh_BBWR said:
If it can wait 6-12 month's I'll be quiting my day job, and doing TVR Repairs and tuning. Inc body off restorations.
If it goes through the MOT today I may very well take you up on that Leigh - I have had it checked a couple of times and been told it is all solid but has some surface shyt on it. I also have a tin of POR15 on standby for the job when I was foolish enough to think I might do this myself suppose it is too early to get an estimate numbers wise?Well body off and strip and paint with POR would be about 2k. if you want it fully stipped every thing taken off, all acid cleaned zinc coated and POR and put back with new bolts 3-4K, works out to about £25PH
TVRleigh_BBWR said:
PR350 said:
TVRleigh_BBWR said:
If it can wait 6-12 month's I'll be quiting my day job, and doing TVR Repairs and tuning. Inc body off restorations.
If it goes through the MOT today I may very well take you up on that Leigh - I have had it checked a couple of times and been told it is all solid but has some surface shyt on it. I also have a tin of POR15 on standby for the job when I was foolish enough to think I might do this myself suppose it is too early to get an estimate numbers wise?Well body off and strip and paint with POR would be about 2k. if you want it fully stipped every thing taken off, all acid cleaned zinc coated and POR and put back with new bolts 3-4K, works out to about £25PH
Will see how today goes!!!
Pencil me in mate.
TVRleigh_BBWR said:
PR350 said:
TVRleigh_BBWR said:
If it can wait 6-12 month's I'll be quiting my day job, and doing TVR Repairs and tuning. Inc body off restorations.
As long as you don't use Wedgeless as your name as that's my idea !!! Good luck with that Leigh, wish I had the guts and the space to do it myself
rev-erend said:
eesbad said:
TVRleigh_BBWR said:
If it can wait 6-12 month's I'll be quiting my day job, and doing TVR Repairs and tuning. Inc body off restorations.
I think you'll need a bigger kitchen, Leigh 
Still a clean place for an engine rebuild 
Forums | Wedges | Top of Page | What's New | My Stuff