FREE parts at wedgefest

[L33]

Well guys, I have a few parts left over from when I had the wedge.
I had a garage clearout last week but couldn't bring myself to chuck them incase someone could make use of them.

Parts are:

1 x 350i bootlid (series 2)
rear light innards (not the outer lense cover)
2 x seatbelts - the non retractible "female" part.
various plastic covers that hide the seat pivot / reclining mechanism.

Probably a few other bits - I'll edit this post as I find stuff.

If you want any of this, speak up and I'll bring it to wedgefest. First to shout gets the bits.

Edited by L33 on Friday 20th June 08:12

[eesbad]

L33 said:

Probably a few other bits - I'll edit this post as I find stuff.

A Tamora for part-ex?

[jmorgan]

Can I bag the covers for the seat belt mech covers please? Going to re carpet and that would help finish off a treat.


I will be bringing a fuel tank cap for a 400 and rad otter switch and securing plate and clips.

[Poledriver]

Damn! I could have used the covers for the seat belt and reclining mechanism, they seem to be missing of my car!

[beacon]

Me too on the seat recliner plastic covers ,got one missing driver side and have been down this route last wedgefest. so also would like a look at these, knowing that there is a queue and a few different sizes whn it comes to these.

[mikeb]

L33 said:

Well guys, I have a few parts left over from when I had the wedge.
I had a garage clearout last week but couldn't bring myself to chuck them incase someone could make use of them.

Parts are:

1 x 350i bootlid (series 2)
rear light innards (not the outer lense cover)
2 x seatbelts - the non retractible "female" part.
various plastic covers that hide the seat pivot / reclining mechanism.

Probably a few other bits - I'll edit this post as I find stuff.

If you want any of this, speak up and I'll bring it to wedgefest. First to shout gets the bits.

Edited by L33 on Friday 20th June 08:12

I needed the recliner cover for the 450! Bum on both accounts!

MikeyB

[adam quantrill]

Bum bum and bum - I wanted those covers too for the 350i!!!

Looks like we all need them - anyone up for a remanufacture? They could probably be done in GRP.

[jmorgan]

adam quantrill said:

Bum bum and bum - I wanted those covers too for the 350i!!!

Looks like we all need them - anyone up for a remanufacture? They could probably be done in GRP.

Been working away again. How about it? Anyone know how or who etc?

[L33]

jmorgan said:

Can I bag the covers for the seat belt mech covers please? Going to re carpet and that would help finish off a treat.


I will be bringing a fuel tank cap for a 400 and rad otter switch and securing plate and clips.

No worries.

[L33]

Poledriver said:

Damn! I could have used the covers for the seat belt and reclining mechanism, they seem to be missing of my car!

I think I have more than 1 set - let me check and get back to you.

[L33]

mikeb said:

L33 said:

Well guys, I have a few parts left over from when I had the wedge.
I had a garage clearout last week but couldn't bring myself to chuck them incase someone could make use of them.

Parts are:

1 x 350i bootlid (series 2)
rear light innards (not the outer lense cover)
2 x seatbelts - the non retractible "female" part.
various plastic covers that hide the seat pivot / reclining mechanism.

Probably a few other bits - I'll edit this post as I find stuff.

If you want any of this, speak up and I'll bring it to wedgefest. First to shout gets the bits.

Edited by L33 on Friday 20th June 08:12

I needed the recliner cover for the 450! Bum on both accounts!

MikeyB

You need a 450se now Mike

[L33]

beacon said:

Me too on the seat recliner plastic covers ,got one missing driver side and have been down this route last wedgefest. so also would like a look at these, knowing that there is a queue and a few different sizes whn it comes to these.

I'll see what I can do bud.

[L33]

Right,
Going through the garage earlier, I have the following:

3 seat recliner covers in black - (Beacon, JMorgan & Poledriver have first refusal)
2 female seatbelt parts (Andy Tank first refusal)
1 high peformance coil
Pair rear light innards
Petrol filler cap
Passenger side mirror metal surround / part window runner
1 number plate light
Passenger side seal between door and dropglass
Hard backed grey boot carpet sides from a 400se

A few other bits also.

I don't want any money for anything (although beer never gets refused) but I would request if you want something, you make a suitable donation to the chosen charity (I don't know what it is yet).

First come first served

Edited by L33 on Friday 25th July 18:17

[Poledriver]

L33 said:

Right,
Going through the garage earlier, I have the following:

3 seat recliner covers in black - (Beacon, JMorgan & Poledriver have first refusal)
2 female seatbelt parts (Andy Tank first refusal)
1 high peformance coil
Pair rear light innards
Petrol filler cap
Passenger side mirror metal surround / part window runner
1 number plate light
Passenger side seal between door and dropglass
Hard backed grey boot carpet sides from a 400se

A few other bits also.

I don't want any money for anything (although beer never gets refused) but I would request if you want something, you make a suitable donation to the chosen charity (I don't know what it is yet).

First come first served

Edited by L33 on Friday 25th July 18:17

I might be popping in one day this weekend (don't know what in!). Would really be interested in the High Performance coil.

Cheers

[jmorgan]

Don't forget to cross me off the seat belt thingies.

[L33]