Wedge window rubbers

[Ubeea]

I'm currently in the process of restoring a 1988 350i and have appeared to have misplaced the window rubbers for both of the windows inside and out.

If anyone has any advice on where I could go to locate some replacements that would be greatly appreciated.

[mrzigazaga]

Hi

Is this for the door seal that goes all the way around the door opening and across the windscreen to the other side?

[phillpot]

mrzigazaga said:

Is this for the door seal .............................?

I'm reading it as something to go here ?.................

[Ubeea]

Hi

Yeah that's the one. Can't seem to find it anywhere.

[mrzigazaga]

Hi Chris


Just replied via email.....

The inner glass seal is essentially the same as the door seal..(side seal)...Possibly a tad smaller...If you order samples from the link make sure you ask for a few or they will only send a couple..

Inner
ETS52108FC
Or
ETS2108
https://www.google.co.uk/url?sa=t&rct=j&q=...

The outer seal...(Waist seal) could be ATJ1937 but I believe people have tried this and its not right, so not 100% on that one I'm afraid...

Not sure if we found a solution?..


Hope this helps...


Ziga

[mrzigazaga]

Hi Chris


I took a pic of the profile of the waist seal...albeit a tad fuzzy..
It does look like the ATJ1937 one listed in seals direct but with the tail cut down.


Hope this helps


Ziga

[Ubeea]

Hi zig

Thank you for your help. Will have a go and see how I get on.

[wooly350i]

I've bought something very similar but as it's quite rigid to bend in a certain plain I'll have to try heating it to bend it where the door curves upwards, hopefully heating it will allow the underside to stretch as it curves up, either that or cutting it underneath but I don't really want to do that, I've still got the chrome ones but they never really stopped the weather running down inside the door