High HC count - could it be ignition problems?
High HC count - could it be ignition problems?
Author
Discussion

Fume Troll

Original Poster:

4,389 posts

243 months

Tuesday 27th May 2008
quotequote all
The Tuscan has a high HC reading on one exhaust - the other is normal. This is with new cats fitted. Could this be a failure in the ignition system? I have noticed an occasional missfire around 5000-5500 rpm, perhaps the same issue?

Cheers,

FT.

dc53

3,217 posts

251 months

Tuesday 27th May 2008
quotequote all
Lambda sensor maybe?

Fume Troll

Original Poster:

4,389 posts

243 months

Tuesday 27th May 2008
quotequote all
Could that have an effect on only one side?

Cheers,

FT.

rev-erend

21,624 posts

315 months

Tuesday 27th May 2008
quotequote all
Get hold of one of those lazer temp guns (about £25) - and aim it as the exhaust pipes in turn .. any mis fires will show up as cooler than the rest !

P100

641 posts

237 months

Tuesday 27th May 2008
quotequote all
Sounds like a Lambda sensor to me...
They have a direct influence on the mixture of the car. If one is not performing well then the info it sends to the ecu will be incorrect and the ecu will adjust the mixture to what info it is receiving.
Get them checked on a diagnostic machine which will pinpoint the offending item..
HTH
Roy

Fume Troll

Original Poster:

4,389 posts

243 months

Wednesday 28th May 2008
quotequote all
Thanks, I'll look into that.

Cheers,

FT.