Speed 6 clutch alignment tool?

[Dave85chim]

Has anyone found a clutch alignment tool for the speed 6 at all? Although I have done the Chim by eye - I don't trust myself to try it on the double plate. Any tips or steer in direction would be great!

[TwinKam]

https://racetechdirect.co.uk/engine/tvr-clutch-ali...

[S6PNJ]

Does anyone have one that they would be willing to 'rent out' to me please? Motaclan have them listed at £1.94 - but none in stock! I need to buy bits from Motaclan anyway so I was hoping to add one to my order. Motaclan link - https://motaclan.com/product/tvr-clutch-alignment-...

As it's a fairly 'minimal' item, I wonder if I can 3D print one? But this relies on me being able to model one correctly ...

Racetech have one at £24.99 ex VAT plus any P&P - but also out of stock.

[Basil Brush]

I've 3d printed one by stretching an existing Porsche model on Bambu MakerWorld. I'll see if I can find the link.

[S6PNJ]

Cheers, that would be great - it should be a 25mm (or 1" - which is 25.4 obvs) x 23 splines - but I don't know the profile of the splines (minor axis, spline shape etc). By a quick measure of my gearbox input shaft, the spigot is 30mm long x 15mm diameter, the splines are 60mm long, overall length needed 90mm long - or thereabouts! Plus some way to grab it back out if it gets stuck (I'll thread a bolt into it so I have something to pull on.)

[Basil Brush]

This is the one I've printed. I'll send you the file.

[Modrich]

Hi BB, any chance you could send me a copy of the file?

[Basil Brush]

Modrich said:

Hi BB, any chance you could send me a copy of the file?

Can you email me so I can attach them to reply.

[Modrich]

email sent through forum