New tyre time?

Author
Discussion

NRG1976

Original Poster:

1,750 posts

23 months

Wednesday
quotequote all
Just before I put 2 new tyres onto my car, I just wanted to check in with the folks here first (blame my dealer paranoia).

My tyres have c5-6mm tread but the dealer said there are one small cut in each of front tyres. I’m inclined to take their word for it given the tyres are crucial for safety, but dealer paranoia has kicked in !

Just to double check with the more knowledgeable on here, below are a couple of screenshots…is it time to get some new tyres ?

Thanks for the help smile





Edited by NRG1976 on Wednesday 30th April 21:43

ChocolateFrog

30,912 posts

186 months

Wednesday
quotequote all
They look a bit tired. How old are they?

NRG1976

Original Poster:

1,750 posts

23 months

Wednesday
quotequote all
ChocolateFrog said:
They look a bit tired. How old are they?
Will need to check to make sure, but think the dot was 2022.

tallpaul26

525 posts

232 months

Wednesday
quotequote all
I’d run the car down to the local indy tyre fitter and ask their opinion.

HarryW

15,463 posts

282 months

Wednesday
quotequote all
Very hard to tell from that picture but it looks more like the star cut type you get from sharp flint, ergo nothing abnormal to me. Do you have a bigger picture too, be easier to judge as I can only see one zoomed in pic?
Personally given its 2-3 years old with 4-6mm tread I’d ignore, however worth getting second opinion if that makes you feel happy.

NRG1976

Original Poster:

1,750 posts

23 months

Wednesday
quotequote all
Thanks, I seem to be having an issue uploading a photo for some unknown reason…hopefully these appear:





Mr Tidy

26,093 posts

140 months

Wednesday
quotequote all
Looking at the photos I'd be changing them. There doesn't seem to be much tread depth on the outer edges either.

littleredrooster

5,864 posts

209 months

Wednesday
quotequote all
Dealer upsell. They try it all the time, and I'd wager that they offer some bargain-basement rubbish for a mid-range price. The Toyota dealer tried it with me, suggesting I replace both front Michelin Cross-Climates with Evergreen summer ditchfinders!

Get a second opinion from a local independent place for honesty and better prices.

Clad-Hach

13 posts

1 month

Wednesday
quotequote all
The common used phrase "you only get what you pay for" very much applies to tyres, the best ones cost more money but tend to last longer and give the best grip.

I've been driving on Michelins for years and they have proved to be a very good choice.

Smint

2,231 posts

48 months

Yesterday (05:31)
quotequote all
Mr Tidy said:
Looking at the photos I'd be changing them. There doesn't seem to be much tread depth on the outer edges either.
So would i, and judging by the cracks starting to appear it wouldn't be two more of the same.

NRG1976

Original Poster:

1,750 posts

23 months

Yesterday (13:44)
quotequote all
Thanks, for info the tires are Michelin Pilot Super Sports. I’ll be sticking with them for the new set if I have to put some on. Going to a tyre place on Saturday so see what they say!

ARHarh

4,586 posts

120 months

Yesterday (14:18)
quotequote all
If you are unsure take it to your local independent tyre shop for a check. They will be honest with you, and give you an estimate of how long they will last or whether they need replacing.

Pica-Pica

15,015 posts

97 months

Yesterday (15:03)
quotequote all
Clad-Hach said:
The common used phrase "you only get what you pay for" very much applies to tyres, the best ones cost more money but tend to last longer and give the best grip.

I've been driving on Michelins for years and they have proved to be a very good choice.
You’ve not driven on early Michelins, I assume. Hopeless in the wet!

Smint

2,231 posts

48 months

Yesterday (15:32)
quotequote all
Pica-Pica said:
You’ve not driven on early Michelins, I assume. Hopeless in the wet!
X and ZX were terrifying in the wet, glad to see the back of them and fitted the then new Goodyear Unisteels.

However XY pattern drive axle fitment truck tyres were even more terrifying if that were possible, multiple oversteers in an artic on wet bends at quite slow speeds is not enjoyable.

Cross plies were better.


Edited by Smint on Thursday 1st May 16:37

E-bmw

10,731 posts

165 months

Yesterday (16:30)
quotequote all
Both of those splits show the wire of the carcass through them, anyone saying "dealer up-sell" is clearly blind.

Need changing immediately.

ETA.
The top pic shows steel wire at the bottom of the split.

The bottom pic shows rusted steel wire at the bottom of the split.



Edited by E-bmw on Friday 2nd May 08:13

wyson

3,225 posts

117 months

Yesterday (16:56)
quotequote all
I think I can see cut cords. Would be an immediate MOT failure.

OP, poke around and confirm. If you can see cords are cut, I’d change them out asap.

Pica-Pica

15,015 posts

97 months

Yesterday (19:30)
quotequote all
Smint said:
Pica-Pica said:
You’ve not driven on early Michelins, I assume. Hopeless in the wet!
X and ZX were terrifying in the wet, glad to see the back of them and fitted the then new Goodyear Unisteels.

However XY pattern drive axle fitment truck tyres were even more terrifying if that were possible, multiple oversteers in an artic on wet bends at quite slow speeds is not enjoyable.

Cross plies were better.


Edited by Smint on Thursday 1st May 16:37
Yes a few early spins put me off Michelin for life. I am a confirmed Goodyear or Continental fan.