Doing it in the right order
Discussion
Going for a full detail on the car tommorow, wanting to do it in the correct order so can anyone advise if im doing it correctly please.
Rinse
Snow foam
Rinse
Hand wash
Rinse
Dry
Clay bar
Rinse
Polish (meguiars ultimate compound)
Glaze (poorboys black hole)
Wax
Is that the correct order in which i should do it??
Rinse
Snow foam
Rinse
Hand wash
Rinse
Dry
Clay bar
Rinse
Polish (meguiars ultimate compound)
Glaze (poorboys black hole)
Wax
Is that the correct order in which i should do it??
The only thing I would say is, don't bother drying it after the first wash. You're only going to clay it and need to re-wash it again anyway, save yourself the trouble. 
Also, instead of quick detailer use a relatively strong shampoo/water mix for claying.
I always found using quick detailer meant using loads of it and on a warm day the panel drying. Friend of mine who details for a living recommended the water option and it's so much easier. Dip a mitt into the water and let it run down the panel, makes the claying process a lot quicker.
Hope that helps mate.

Also, instead of quick detailer use a relatively strong shampoo/water mix for claying.
I always found using quick detailer meant using loads of it and on a warm day the panel drying. Friend of mine who details for a living recommended the water option and it's so much easier. Dip a mitt into the water and let it run down the panel, makes the claying process a lot quicker.
Hope that helps mate.
OpulentBob said:
Smooch, squeeze, fingerbang, lickering, vanilla, oxo (shirley)?

Most eloquently phrased Sir Robert. 

Except you did omit the cocktails...

Would somebody be so kind as to direct the OP to the "Detailing" Section way over there? ----->>
They could do with some extra numbers...
Meanwhile, my advice would be: " Just get a proper car and drive it like you stole it. "
There. Karma is restored once more.

My current routine is;
Prewash,
Rinse
Wheels, iron out and clean
Rinse wheels
Snow foam
Rinse
Hand wash
Rinse
Dry
Polish
Wax
Details, (tyre dress, wheel wax, glass cleaner, trim protect)
Polish and wax is only as required, so normally omit these and I can get through the other steps in about 2 hours. Never clay, I send to a detailer for that.
Prewash,
Rinse
Wheels, iron out and clean
Rinse wheels
Snow foam
Rinse
Hand wash
Rinse
Dry
Polish
Wax
Details, (tyre dress, wheel wax, glass cleaner, trim protect)
Polish and wax is only as required, so normally omit these and I can get through the other steps in about 2 hours. Never clay, I send to a detailer for that.
Gassing Station | Bodywork & Detailing | Top of Page | What's New | My Stuff



