Post-ceramic care and products
Post-ceramic care and products
Author
Discussion

Koyaanisqatsi

Original Poster:

2,466 posts

49 months

Saturday 11th October
quotequote all
I've recently had a brand new blue car detailed, with ceramic coating applied. I didn't bother with the wheels since it's an EV and will generate relatively little brake dust.

I'm far from a detailer myself, but I do understand how to carefully wash a car to avoid general scratches and swirl marks.

What products would you recommend? I'm thinking mostly along the lines of a good but reasonably priced PH neutral wash soap. I asked the detailer if it's worth buying one of those little air jet blaster tools and he said don't bother unless you are using filtered water to wash, which I obviously won't be.

Any other major dos and don'ts when it comes to washing after a ceramic coating?

Steve Campbell

2,287 posts

187 months

Saturday 11th October
quotequote all
About to get a new car done. I’ve been using Gtechniq G wash for shampoo and found it very good.

Deviation

133 posts

23 months

Saturday 11th October
quotequote all
Which brand of ceramic coating is it?

Generally best to keep on brand, since they’ll have specifically tested it with their own branded products :-)

Koyaanisqatsi

Original Poster:

2,466 posts

49 months

Saturday 11th October
quotequote all
Deviation said:
Which brand of ceramic coating is it?

Generally best to keep on brand, since they ll have specifically tested it with their own branded products :-)
It was Gyeon Infinite

Belle427

11,004 posts

252 months

Saturday 11th October
quotequote all
Your detailer should have told you that really.
A neutral shampoo is fine but it may need a stronger one every 6 months or so to bring the coating back to life.
Gyeon make great products so I would stick with them.

Deviation

133 posts

23 months

Sunday 12th October
quotequote all
Koyaanisqatsi said:
It was Gyeon Infinite
Then go with Gyeon products.

Snow foam & shampoo.


Every 6 months use a fallout remover to revive the coating.


Don’t use acidic quick detailers or rinseless washes - they may degrade the coating (though not all coatings are equal)