Ford Pilot 1943, garage help
Discussion
You could try NAMCO in Camberley.
https://namcoamerican.com/
Although its not an American car per se, they know their way around flathead V8's, and 30's and 40's era US Ford's, which is what the pilot is based on.
I'm guessing your thread title of 1943 Pilot is a typo, and should be 1948(?) as the Pilot was made between 1947 and 1951.
https://namcoamerican.com/
Although its not an American car per se, they know their way around flathead V8's, and 30's and 40's era US Ford's, which is what the pilot is based on.
I'm guessing your thread title of 1943 Pilot is a typo, and should be 1948(?) as the Pilot was made between 1947 and 1951.
TI Developments in Westbury look after both my classics, and do great work across a wide range of makes. Admittedly they are a bit further than 80 miles out, but there's a direct train to/from London (about 1¼hr) a short walk from their workshops. I've known the owner almost since he was the apprentice and then mechanic at another classic car garage 20 years ago; he set up his own place about five years ago and is doing really well.
https://tidevelopments.co.uk
https://tidevelopments.co.uk
E-bmw said:
hellsbuddha said:
Does anyone recommend a decent, trustworthy garage say 80 miles from London.
If you want a garage "80 miles from London" it might be worth saying in which direction, and yes I know there aren't many directions that you can go to get 80 miles from London.aeropilot said:
E-bmw said:
hellsbuddha said:
Does anyone recommend a decent, trustworthy garage say 80 miles from London.
If you want a garage "80 miles from London" it might be worth saying in which direction, and yes I know there aren't many directions that you can go to get 80 miles from London.There is only one person I would give a Ford of that age to work on and he is in Hornchurch Essex,
Won't find him anywhere online or advertising and he doesn't charge hundreds per hour, workshop beside his house.
If you can tell on here what sort of work wants doing and if its mechanical will ask him if he fancies it.
Won't find him anywhere online or advertising and he doesn't charge hundreds per hour, workshop beside his house.
If you can tell on here what sort of work wants doing and if its mechanical will ask him if he fancies it.
Will do and thanks
Apparently Namco wasn t a positive experience but will get him to try the others.
Will need to get a low loader to get it there but I gather this is what needs doing:
1. It needs to be started up, not been used for a few years. Definitely the charging system is not working properly, it doesn’t charge at full rate
2. There’s several grease points too. Radiator too & whole system check for perished hoses. In fact, everything needs checking, brakes etc as it’s not been used.
Thank you for any help, much appreciated
Apparently Namco wasn t a positive experience but will get him to try the others.
Will need to get a low loader to get it there but I gather this is what needs doing:
1. It needs to be started up, not been used for a few years. Definitely the charging system is not working properly, it doesn’t charge at full rate
2. There’s several grease points too. Radiator too & whole system check for perished hoses. In fact, everything needs checking, brakes etc as it’s not been used.
Thank you for any help, much appreciated
Edited by hellsbuddha on Wednesday 28th October 19:08
GordonGekko said:
For flathead Fords; although out of the location requirements, Jim turnbull in Holton Heath is very good.
Yep, Jim is the UK's (and probably Europe's) leading Ford Flattie expert.But, as said, he's a little beyond the location limit, and to be honest after hearing about what needs doing, its not really in his line of work, given his workload of projects.
GordonGekko said:
There are many self proclaimed experts who are absolute conmen in the early ford scene - avoid Ipswich and Colchester like the plague ..

GordonGekko said:
For flathead Fords; although out of the location requirements, Jim turnbull in Holton Heath is very good.
There are many self proclaimed experts who are absolute conmen in the early ford scene - avoid Ipswich and Colchester like the plague ..
This. Jim did the flathead and mechanicals in my 37 Woodie and it’s, touch wood, been wonderful. I would add that I’ve also used Namco in Camberley for some servicing/minor repairs and my experience was positive.There are many self proclaimed experts who are absolute conmen in the early ford scene - avoid Ipswich and Colchester like the plague ..
As mentioned there are no 1943 Pilots - if it’s a Pilot it’s postwar and if prewar it’s a V8!
hellsbuddha said:
Will do and thanks
Apparently Namco wasn t a positive experience but will get him to try the others.
Will need to get a low loader to get it there but I gather this is what needs doing:
1. It needs to be started up, not been used for a few years. Definitely the charging system is not working properly, it doesn t charge at full rate
2. There s several grease points too. Radiator too & whole system check for perished hoses. In fact, everything needs checking, brakes etc as it s not been used.
Thank you for any help, much appreciated
Where is the car located ? East London near the river? I know of one there. Apparently Namco wasn t a positive experience but will get him to try the others.
Will need to get a low loader to get it there but I gather this is what needs doing:
1. It needs to be started up, not been used for a few years. Definitely the charging system is not working properly, it doesn t charge at full rate
2. There s several grease points too. Radiator too & whole system check for perished hoses. In fact, everything needs checking, brakes etc as it s not been used.
Thank you for any help, much appreciated
Edited by hellsbuddha on Wednesday 28th October 19:08
Can move it on my truck if it is that one.
Yes ignorance on my part writing 43 instead of 48, noted, can’t seem to correct the title.
This one s in NW London, so depending on where it goes will definitely need a low loader.
I guess if someone was really good and trustworthy a longer distance would not be out the question. The key is to get it running again.
This one s in NW London, so depending on where it goes will definitely need a low loader.
I guess if someone was really good and trustworthy a longer distance would not be out the question. The key is to get it running again.
Edited by hellsbuddha on Thursday 29th October 14:20
hellsbuddha said:
Yes ignorance on my part writing 43 instead of 48, notes.
This one s in NW London, so depending on where it goes will definitely need a low loader.
I guess if someone was really good and trustworthy a longer distance would not be out the question. The key is to get it running again.
OK, we have established it a mechanical refresh and safety items replaced, probably fuel drained and tank cleaned. This one s in NW London, so depending on where it goes will definitely need a low loader.
I guess if someone was really good and trustworthy a longer distance would not be out the question. The key is to get it running again.
I will ask him tomorrow, I can move it from NW London, if anyone knows where to find old Ford parts its him.
Doesitdrive said:
OK, we have established it a mechanical refresh and safety items replaced, probably fuel drained and tank cleaned.
I will ask him tomorrow, I can move it from NW London, if anyone knows where to find old Ford parts its him.
Thanks, owner is away this weekend and will reach out next week.I will ask him tomorrow, I can move it from NW London, if anyone knows where to find old Ford parts its him.
Thank you much appreciated
Gassing Station | Classic Cars and Yesterday's Heroes | Top of Page | What's New | My Stuff


