Rubber Boot Coming undone
Discussion
Hi
I am having a recurring problem with rubber flange protecting the electric wiring feeding the boot of my car. It keeps coming undone, earlier this year it lead to an expensive repair on the wiring loom which broke.
Any ideas what is causing the rubber flange to pop out and how can I prevent it happening in the future?
Thanks
I am having a recurring problem with rubber flange protecting the electric wiring feeding the boot of my car. It keeps coming undone, earlier this year it lead to an expensive repair on the wiring loom which broke.
Any ideas what is causing the rubber flange to pop out and how can I prevent it happening in the future?
Thanks
If it is popping out it may well be due to some tension being placed on it due to the wiring being incorrectly positioned, or a lateral force caused by the same issue. Have a look at the grommet as you open and close the boot / door, and see if any force is being placed on it, and if so whether there is any adjustment you can make to the wiring which will reduce it.
Otherwise you could try sticking it in place with something flexible and which can be removed if required - so maybe some RTV silicone (rather than something like superglue).
Otherwise you could try sticking it in place with something flexible and which can be removed if required - so maybe some RTV silicone (rather than something like superglue).
Gassing Station | In-Car Electronics | Top of Page | What's New | My Stuff


