2011 1.6 D2 diesel engine mount/torque mount diagrams

[mike-2txrc]

Hi,

Does anyone have a diagrams of where and what spare engine mounts to get for the D2 1.6.

I think if it has like others do the torque mount may have gone as when the engine is idling there is a slight back to front judder and when you rev the engine it quite significantly moves back to front.

Any help would be great

Cheers

[E-bmw]

mike-2txrc said:

Hi,

Does anyone have a diagrams of where and what spare engine mounts to get for the D2 1.6.

I think if it has like others do the torque mount may have gone as when the engine is idling there is a slight back to front judder and when you rev the engine it quite significantly moves back to front.

Any help would be great

Cheers

In the first instance that engine is fitted to virtually every Volvo car produced in 2011 & it is very likely that EVERY model will have different mounts.

In the second, just have a look/take a pic & do a search on ebay/GSF/ECP/Carparts4less/Partsinmotion etc. I am sure you will find the right one without needing to wait for someone to find a diagram.

In fact you could probably have done that in the time it took you to write the above post.

[mike-2txrc]

Thanks for the post and I wouldn't be asking the question if I could actually find the answer after hours of looking. I don't have issues with my VW, Audi, Aston DB9 or even 67 Mustang but Volvo there seems to be that many variations with no information about them

I can only see the top ones and without getting it up on the ramp and taking the underpant off I can't see any others.

Edited by mike-2txrc on Sunday 1st February 11:16