What bike torque wrench do you use?
What bike torque wrench do you use?
Author
Discussion

sleep envy

Original Poster:

62,260 posts

279 months

Monday 17th September 2012
quotequote all
I'm starting to build up a nice collection of bike tools and want a torque wrench next, one grunt or two grunts with an allen key might not be the best solution to doing up bolts - bearing in mind that they're pretty pricey which one do you have?

LotusMartin

1,127 posts

182 months

Monday 17th September 2012
quotequote all
Product ID: PRS100340
Product Name: Pro 3-15 Nm torque wrench set
Price: £60.80

From fatbirdsDOTcoDOTuk

Was recommended it as the mechanics in various bike shops seem to use them - pretty impressed with it so far.

You will find plenty of discussions regarding these type of wrenches and how they are a waste of time, feel is better, they don't stay calibrated etc etc, better than nothing in my opinion.

IroningMan

10,598 posts

276 months

Monday 17th September 2012
quotequote all
I have a 3/8 drive Halfords pro one for 10NM upwards, below that I mostly guess.

mikecassie

674 posts

189 months

Monday 17th September 2012
quotequote all
Norbar 1-20NM 1/4" drive torque wrench £85 from ebay, for higher torques I've a Snap On 3/8" drive one cost about the same. And just for good measure, although not required for the bike there is a Snap On 1/2" drive torque wrench.

Jimbo.

4,231 posts

219 months

Monday 17th September 2012
quotequote all
Picked up one from ProBikeKit for something like £30 a couple of years back. Does the job nicely.

AyBee

11,340 posts

232 months

Monday 17th September 2012
quotequote all

Rocksteadyeddie

7,971 posts

257 months

Monday 17th September 2012
quotequote all
This one. Despite owning one I'm in two minds about how useful they are. Unless you're a total clutz I'm not sure they rank as an "essential" bit of kit.

sleep envy

Original Poster:

62,260 posts

279 months

Monday 17th September 2012
quotequote all
One can never have too many tools.

BadgerBenji

3,534 posts

248 months

Monday 17th September 2012
quotequote all
Bring my SnapOn one home from work, one of the benefits of being a vehicle tech, you have a massive arsenal of tools built up over the years.

Magic919

14,543 posts

231 months

Wednesday 19th September 2012
quotequote all
If you want something suitably PH then look at the Computorq3. They do a high accuracy (HA) version for a few more pennies.

Steve vRS

5,402 posts

271 months

Wednesday 19th September 2012
quotequote all
IroningMan said:
I mostly guess.
But being a PH member and therefore a powerfully built company director, I can't guess as I would CRUSH the tubes with my bolt tightening. wink

Steve

Simond S

4,519 posts

307 months

Thursday 20th September 2012
quotequote all
I use the Effetto mariposa wrench

http://activesport.co.uk/shop/article_E-EMGF2PB216...

http://www.effettomariposa.eu/en/products/giustafo... for the website.

A truly beautiful litle wrench.

sleep envy

Original Poster:

62,260 posts

279 months

Thursday 20th September 2012
quotequote all
£171

rofl