S2k Rear bumper design fault
S2k Rear bumper design fault
Author
Discussion

Mickwilbob

Original Poster:

35 posts

195 months

Friday 1st January 2010
quotequote all
Hi, has anyone experience the design fault in the rear bumper of the S2000?
My 05 model collects gravel in the centre section where the number plate is.
Anyone else experienced this?

johnS2000

458 posts

193 months

Friday 1st January 2010
quotequote all
They all do it , from the first one made to the last .

mikey k

13,068 posts

237 months

Friday 1st January 2010
quotequote all
They do but there is an easy fix wink
Whip it off and fill the "scoop" with foam wink

Mickwilbob

Original Poster:

35 posts

195 months

Saturday 2nd January 2010
quotequote all
Thanks for that... how easy is it to remove the bumper?

Dracoro

8,956 posts

266 months

Saturday 2nd January 2010
quotequote all
Can't you just hold the car upside down and shake all the gravel out? biggrin

10 Pence Short

32,880 posts

238 months

Saturday 2nd January 2010
quotequote all
Dracoro said:
Can't you just hold the car upside down and shake all the gravel out? biggrin
We were at Oulton a few Decembers ago and one of the lads ran his (much lowered) Integra into the kitty litter. Wish we could have done exactly that...

It was OK, though. We got the girls to bounce the car as we got the gravel out (and watched the girls 'bouncing').


mikey k

13,068 posts

237 months

Sunday 3rd January 2010
quotequote all
three clips under boot lip
two clips at the bottom
two screws in wheel arch
aannnnnnnnnnnd pull! wink
watch out for rear lights (and or fog light) loom

m1bjr

72 posts

203 months

Thursday 7th January 2010
quotequote all
Surely the number plate surround can be removed without yanking the whole apron off?

mikey k

13,068 posts

237 months

Monday 11th January 2010
quotequote all
It can be, but it is easier & quicker to take the bumper off to get access from above the holder and fill the void that fills with stones.
I've done it both ways wink