Dial for Seiko NH36A movement

[Ninjin]

need some help with dials. I have a Pagrne with a NH36a movement and I want to change the dial.

I want to put a OEM seiko dial on the Pargne.

https://www.cousinsuk.com/product/white-seiko-dial...






https://www.aliexpress.com/item/1005001774613367.h...

Would this work? The dial I think is from the Seiko Samurai.

Edited by Ninjin on Thursday 13th January 11:21

[Wallace12R]

I think so, yes. I’m not 100% on that but so long as the dial is the same size you should be ok.

It all depends on the locating pins on the back of the Seiko dial, but as you wanting to fit it to a Seiko movement, you’d think that they would be in the right place.

[Ninjin]

thanks for the help. I'll get the movement out of the Pagrne and measure the dial.

[Wallace12R]

Ninjin said:

thanks for the help. I'll get the movement out of the Pagrne and measure the dial.

No problem. As it’s for the NH35 it should be about 28.5mm dia.

[GC8]

It is the location of the dial feet that are more likely to cause a problem than the diameter. If the do not match the movement then youre looking at cutting them off and fixing the the face using dial dots (a bodge, really).