Stainless Steel v Ply\Clad pans
Discussion
Looking at getting a saucier\sauteuse\chef style pan but going to go a bit more cheffy and give the non-stick a miss
Procook do a SS one with a pretty thick base for a reasonable price
https://www.procook.co.uk/product/procook-professi...
or is the additional cost of a multiply one like the Made In worth the extra expense ie double the price!
https://www.madeincookware.co.uk/products/stainles...
it'll be used on a induction hob and the Aga when I fire it back up for winter
Thanks
Procook do a SS one with a pretty thick base for a reasonable price
https://www.procook.co.uk/product/procook-professi...
or is the additional cost of a multiply one like the Made In worth the extra expense ie double the price!
https://www.madeincookware.co.uk/products/stainles...
it'll be used on a induction hob and the Aga when I fire it back up for winter
Thanks
JimM169 said:
Looking at getting a saucier\sauteuse\chef style pan but going to go a bit more cheffy and give the non-stick a miss
Procook do a SS one with a pretty thick base for a reasonable price
https://www.procook.co.uk/product/procook-professi...
or is the additional cost of a multiply one like the Made In worth the extra expense ie double the price!
https://www.madeincookware.co.uk/products/stainles...
it'll be used on a induction hob and the Aga when I fire it back up for winter
Thanks
I ditched all my non-stick stuff as got fed up with them being stick after a while. Went fully stainless steel. Pots were from John Lewis and very good. Procook do a SS one with a pretty thick base for a reasonable price
https://www.procook.co.uk/product/procook-professi...
or is the additional cost of a multiply one like the Made In worth the extra expense ie double the price!
https://www.madeincookware.co.uk/products/stainles...
it'll be used on a induction hob and the Aga when I fire it back up for winter
Thanks
My frying pans are Merten & Storck 20cm, 26cm and 30cm Frying Pan and switched to a Procook wok.
https://www.procook.co.uk/product/elite-triply-sig...
I have to say the Procook Elite Signature Wok is excellent. Wish I'd got their frying pans too (the Merten & Storck are ok but have discoloured compared to the John Lewis and Procook stuff)
I've heard good things about Made In but they're a bit pricier for me tbh,.
28cm is a large pan for induction where it will heat the centre and not to the edge as your aga will (I'm assuming its a solid top?)
A pan with a base made from various layers which improve heat conductivity and distribution will help a bit but to be honest, probably not enough.
I'd just go with he procook pan with a lid which is another 26 quid but its glas which is better than the other one anyway.
A pan with a base made from various layers which improve heat conductivity and distribution will help a bit but to be honest, probably not enough.
I'd just go with he procook pan with a lid which is another 26 quid but its glas which is better than the other one anyway.
21TonyK said:
28cm is a large pan for induction where it will heat the centre and not to the edge as your aga will (I'm assuming its a solid top?)
A pan with a base made from various layers which improve heat conductivity and distribution will help a bit but to be honest, probably not enough.
I'd just go with he procook pan with a lid which is another 26 quid but its glas which is better than the other one anyway.
I did wonder about the size especially as mainly cook for myself at the moment but there are 3 of us in the household so the extra capacity may be useful at times. Shame the Procook doesn't come in a 25cm like the Made In (the 18cm cooking surface would be better fit to the induction as well )A pan with a base made from various layers which improve heat conductivity and distribution will help a bit but to be honest, probably not enough.
I'd just go with he procook pan with a lid which is another 26 quid but its glas which is better than the other one anyway.
JimM169 said:
21TonyK said:
28cm is a large pan for induction where it will heat the centre and not to the edge as your aga will (I'm assuming its a solid top?)
A pan with a base made from various layers which improve heat conductivity and distribution will help a bit but to be honest, probably not enough.
I'd just go with he procook pan with a lid which is another 26 quid but its glas which is better than the other one anyway.
I did wonder about the size especially as mainly cook for myself at the moment but there are 3 of us in the household so the extra capacity may be useful at times. Shame the Procook doesn't come in a 25cm like the Made In (the 18cm cooking surface would be better fit to the induction as well )A pan with a base made from various layers which improve heat conductivity and distribution will help a bit but to be honest, probably not enough.
I'd just go with he procook pan with a lid which is another 26 quid but its glas which is better than the other one anyway.
Half way?
https://www.amazon.co.uk/Samuel-Groves-Compatible-...
Not used one of these but they have a decent reputation.
I have 3 Procook pans from the top tri-ply range and they're very nice. I previously had one from the middle range and it was decent but I reckon the heat distribution was worse.
I have a cheap induction hob and it does 'hotspot' with all pans to some degree, but some are definitely worse than others. I miss my old gas hob but getting gas in my current place would be more trouble than it's worth...
I have a cheap induction hob and it does 'hotspot' with all pans to some degree, but some are definitely worse than others. I miss my old gas hob but getting gas in my current place would be more trouble than it's worth...
21TonyK said:
A 28cm pan is not good for one portion. Most of mine are that sort of size and now the kids are gone and its just two of use I use 24cm pans for most stuff.
Half way?
https://www.amazon.co.uk/Samuel-Groves-Compatible-...
Not used one of these but they have a decent reputation.
Was tempted by that SG pan then found this Half way?
https://www.amazon.co.uk/Samuel-Groves-Compatible-...
Not used one of these but they have a decent reputation.
https://kuhnrikon.com/ch_en/culinary-fiveply-wok-u...
It's a bit smaller at 24cm but has higher sides which is more the style I'm after (not sure I'd call it a wok though!). Also a bit thicker, reading the reviews the SG is actually 2.5mm whereas the KR is a proper 3.2mm so should be a bit more induction proof if my daughter gets her hands on it! Best of all it was only £80 on the KR Outlet shop on ebay (Think I got the last one!!)

netherfield said:
Lodge Cast Iron
Again it's maybe an issue with my not-brilliant (Stoves) induction hob, but the heat distribution with cast iron is really not great. The middle of the pan can be absolutely ripping hot while the edges are just warm. Cast iron is a poor thermal conductor so maybe that's not surprising. When I had a gas hob I had a good method for indoor pizza where I'd blast it in a cast iron pan to cook the base, and then stick it under the grill to finish. I've struggled to reproduce this with the induction hob as the middle of the base burns before the edges are cooked.
I just did a very big deep dive into this (moving house and used it as an excuse to upgrade all our cookware) and bought a full Made In set. Before this, I had some M&S stainless steel saucepans that I'd had since uni and were great/completely fine, then a mix of non-stick Tefal, Bourgeat and Procook frying pans of various sizes.
I haven't actually used the Made In yet so my 'review' is going to be of limited value...
I wanted to make the move from non-stick to stainless steel to avoid the apparently toxic coatings (although on reflection with the amount of crap we ingest from our food, water and air I feel like a microscopic amount of coating in a dish is the least of our worries...).
Anyway, from my research, it seems to main options for a quality SS set that isn't insanely expensive are:
- Made In
- All Clad
- Hestan
In general, from what I could gather, they are much of a muchness and people tend to choose on:
1. Looks
- Made In has brushed stainless with some options to have coloured handles, All Clad are shiny, Hestan has both shiny and brushed models
2. Handle (hard to test when buying online)
3. 'Sealed Rim'
- Some Hestan lines have sealed rims (meaning they can go in dishwasher indefinitely), AC/MI do not normally have sealed rims so over time the edges of the pans become rough if they go in the dishwasher a lot. This was not a problem for me as I very rarely put a pan in the dishwasher.
4. Origin story
- Made In is 'made' in France and Italy, although the rumour is that they actually import a lot of the components from China and then finish manufacture in Europe... Having been to some Chinese factories this year, and quite literally seen the future, the old "Chinese goods are crap" adage is pretty outdated.
- All Clad is made in the US if that's your thing
- Hesten similar to Made In. It's part of Meyer, which is the largest cookware distributor in the US and was started in Hong Kong in the 70s I think...
As I said above, haven't used the pans, but I thought the Made In looked nicest with the coloured handles and got them for a decent price so went for them...
I haven't actually used the Made In yet so my 'review' is going to be of limited value...
I wanted to make the move from non-stick to stainless steel to avoid the apparently toxic coatings (although on reflection with the amount of crap we ingest from our food, water and air I feel like a microscopic amount of coating in a dish is the least of our worries...).
Anyway, from my research, it seems to main options for a quality SS set that isn't insanely expensive are:
- Made In
- All Clad
- Hestan
In general, from what I could gather, they are much of a muchness and people tend to choose on:
1. Looks
- Made In has brushed stainless with some options to have coloured handles, All Clad are shiny, Hestan has both shiny and brushed models
2. Handle (hard to test when buying online)
3. 'Sealed Rim'
- Some Hestan lines have sealed rims (meaning they can go in dishwasher indefinitely), AC/MI do not normally have sealed rims so over time the edges of the pans become rough if they go in the dishwasher a lot. This was not a problem for me as I very rarely put a pan in the dishwasher.
4. Origin story
- Made In is 'made' in France and Italy, although the rumour is that they actually import a lot of the components from China and then finish manufacture in Europe... Having been to some Chinese factories this year, and quite literally seen the future, the old "Chinese goods are crap" adage is pretty outdated.
- All Clad is made in the US if that's your thing
- Hesten similar to Made In. It's part of Meyer, which is the largest cookware distributor in the US and was started in Hong Kong in the 70s I think...
As I said above, haven't used the pans, but I thought the Made In looked nicest with the coloured handles and got them for a decent price so went for them...
22s said:
JimM169 said:
Have to say if I was buying purely on looks the Made Ins with brushed copper handles would have been my choice!
It was a toss up and ended up going for Antique Brass in the end!I feel like a Christmas treat but my kitchen stuff gets used and abused.
Gassing Station | Food, Drink & Restaurants | Top of Page | What's New | My Stuff


