torque settings for drive shaft

[bluesatin]

I can't find any of my build cd's. Can anybody let me know the torque settings for the bolts on the drive shaft.

thanks

[CanAm Dave]

Hi Guy

The build CD says 28-32lbs.

Regards Dave

[Bitzleftover]

Hi The build CD quotes 60 ft/lb for the transaxle end with the 28-32 ft/lb for the hub end.

[CanAm Dave]

Bitzleftover said:

Hi The build CD quotes 60 ft/lb for the transaxle end with the 28-32 ft/lb for the hub end.

Interesting as it only quotes one figure in my manual and on the CD.

Regards Dave

[bluesatin]

all done - thanks

[luckyp]

bluesatin said:

I can't find any of my build cd's. Can anybody let me know the torque settings for the bolts on the drive shaft.

thanks

Am I reading too much into things to think that you've been doing some box jiggery pokery??

[bluesatin]

No - just a split rubber boot on the drive shaft- decent box as it is with higher ratio and LSD.