Tighter socket
Tighter socket
Author
Discussion

NDA

Original Poster:

24,938 posts

249 months

Thursday 2nd November 2017
quotequote all

I have an aux input (that can't be dismantled as it's flush fitted somewhere) that is getting a bit loose... it's a 3.5mm headphone jack that the plugs rattle around in a bit and cause signal loss.

Are there any handy tips for making such a socket a bit tighter?

NDA

Original Poster:

24,938 posts

249 months

Monday 6th November 2017
quotequote all
Bump. smile

benz0

344 posts

157 months

Monday 6th November 2017
quotequote all
pelvic floor exercises?

NDA

Original Poster:

24,938 posts

249 months

Monday 6th November 2017
quotequote all
I've tried.... still leaking.

psi310398

10,667 posts

227 months

Monday 6th November 2017
quotequote all
NDA said:
I have an aux input (that can't be dismantled as it's flush fitted somewhere) that is getting a bit loose... it's a 3.5mm headphone jack that the plugs rattle around in a bit and cause signal loss.

Are there any handy tips for making such a socket a bit tighter?
Flush fitted to a chassis or a wall?

If to a bit of kit, try removing the back/top and seeing how accessible it is. You might simply be able to use a pair of pliers to tighten the connection locally (with a plug in the socket).

If knackered, Maplins will probably be able to sell you a replacement. Simply desolder the duff one and replace with minty new one and solder it up.

Needless to say, disconnect the kit from the mains first and let any capacitors discharge for an hour or two first.

NDA

Original Poster:

24,938 posts

249 months

Tuesday 7th November 2017
quotequote all
Unfortunately it's in a car - and I don't want to take the dashboard to bits. It's an audio in socket which I use a lot and there's no workaround to get audio in another way.

OldGermanHeaps

4,996 posts

202 months

Tuesday 7th November 2017
quotequote all
A short extension cable with some hot melt glue to hold it steady in a working position? Tbh if you arent prepared to spend the 15 minutes it would take to fix it properly every other solution would be a bodge.

768

19,194 posts

120 months

Tuesday 7th November 2017
quotequote all
To be fair, I've never managed a car audio job of any sort in anything like 15 minutes. That's if I've been able to get the radio back in at all.

OldGermanHeaps

4,996 posts

202 months

Tuesday 7th November 2017
quotequote all
In that case there are competent people out there who carry out tasks in exchange for currency.

NDA

Original Poster:

24,938 posts

249 months

Tuesday 7th November 2017
quotequote all
I was only seeking a quick fix from someone rather than a lesson in capitalism. smile

SantaBarbara

3,244 posts

132 months

Tuesday 7th November 2017
quotequote all
NDA said:
Bump. smile
No. I do not think bumping it will do any good.

NDA

Original Poster:

24,938 posts

249 months

Tuesday 7th November 2017
quotequote all
SantaBarbara said:
No. I do not think bumping it will do any good.
True. Feels good though.

OldGermanHeaps

4,996 posts

202 months

Tuesday 7th November 2017
quotequote all
NDA said:
I was only seeking a quick fix from someone rather than a lesson in capitalism. smile
I suggested a quick fix. The proper fix would be quick too though.