Cover screw holes in UPVC Fascia
Cover screw holes in UPVC Fascia
Author
Discussion

anonymous-user

Original Poster:

77 months

Sunday 25th January
quotequote all
I’m looking to move a CCTV Camera. What would be best to cover the screw holes in the UPVC Fascia?

sherman

14,853 posts

238 months

Sunday 25th January
quotequote all
Put screws back in the hole using one of these screw caps to neaten it up.

Diall White Plastic Decorative Snap cap (Dia)12mm, Pack of 20 https://share.google/VUKqkjpu1dZM3dPJK

indigochim

2,067 posts

153 months

Sunday 25th January
quotequote all
You can get white plastic screw covers id just put the screws bad in with one of those on.

Ah beaten to it.

anonymous-user

Original Poster:

77 months

Sunday 25th January
quotequote all
I’ve seen those caps. Plus the nails you can use. I’ve seen this

https://www.screwfix.com/p/toupret-glazing-putty-w...

Because it’s round it has 4 holes either corner.

Belle427

11,250 posts

256 months

Sunday 25th January
quotequote all
I would probably just neaten the rough edges and use a decent white silicone to fill.

anonymous-user

Original Poster:

77 months

Sunday 25th January
quotequote all
I’ll try a bit of silicon. There is this company:

https://www.konig-uk.co.uk/products/toolsaccessori...

J6542

3,240 posts

67 months

Sunday 25th January
quotequote all
Either screws with covers or a bit of silicone. The rest of it isn’t very tidy anyway

KAgantua

5,093 posts

154 months

Sunday 25th January
quotequote all
My eyes!

anonymous-user

Original Poster:

77 months

Sunday 25th January
quotequote all
KAgantua said:
My eyes!
I’m not an optician unfortunately.

anonymous-user

Original Poster:

77 months

Sunday 25th January
quotequote all
I’ve also seen Butt Joints

https://homesmartonline.co.uk/products/upvc-plasti...

I may get one just to see if it will fit.

Rough101

2,961 posts

98 months

Sunday 25th January
quotequote all
Dummy camera over the top?

megaphone

11,462 posts

274 months

Monday 26th January
quotequote all
There may well be a larger hole behind the camera where the cable comes through.

anonymous-user

Original Poster:

77 months

Monday 26th January
quotequote all
megaphone said:
There may well be a larger hole behind the camera where the cable comes through.
There is. It may have to be a new fascia board.

thebraketester

15,443 posts

161 months

Monday 26th January
quotequote all
Mr.Nobody said:
There is. It may have to be a new fascia board.
Anything else will look a mess.

clockworks

7,107 posts

168 months

Monday 26th January
quotequote all
Leave that camera where it is, buy another one for the new location.

J6542

3,240 posts

67 months

Monday 26th January
quotequote all
Just cut a rectangle of upvc the depth of the soffit and slightly wider than the camera then stick on top. The existing piece of upvc has probably been stuck on to an old piece of ply which has been nailed down into from the top, which may all come off when you try and remove the fascia. Depends how big a job you want to give yourself.

Plus4Four#

116 posts

4 months

Monday 26th January
quotequote all
Get some Polynails as they have plastic head covers. Several years ago we had new upvc soffits/gutters and the fitter gave me some as spares. Still got some in a box. Be careful hitting them though as the plastic can break easily.