When was the last time you checked your tyre pressures?
Discussion
Other week - someone commented on how flat one of them looked. Considering it'd passed an MOT and gone in for a load of work at a main dealer recently I'd have hoped they'd have been checked... obviously not and why?? Because the metal caps some idiot had fitted in the past were corroded to the valves so I reckon given how rubbish they were with other work, they'd tried to check the pressues, not been able to budge the caps and left it.... Dremel out and removed the caps, pumped all tyres up to the correct pressures and replaced the caps with black plastic ones.
Every time I start the car (done by the car rather than me!!)
The ABS wheel sensor version is a bit of a liability though as it gives a false sense of security to the many people don't know how it works. If all the tyres go down at the same rate (quite possible if on newish wheels) the pressures can get really low before you get an alarm.
With the valve sensor version this isn't a problem as any tyre goes below the required pressure threshold you get an alarm.
The ABS wheel sensor version is a bit of a liability though as it gives a false sense of security to the many people don't know how it works. If all the tyres go down at the same rate (quite possible if on newish wheels) the pressures can get really low before you get an alarm.
With the valve sensor version this isn't a problem as any tyre goes below the required pressure threshold you get an alarm.
Forums | General Gassing | Top of Page | What's New | My Stuff


