RE: OMFG: Vintage Modern puts 'tang' in Mustang
RE: OMFG: Vintage Modern puts 'tang' in Mustang
Friday 20th November

OMFG: Vintage Modern puts 'tang' in Mustang

We've all seen classics brought up to date; what about a new Mustang made to look old?


Just when it seems like we’ve seen it all in the backdated, reimagined scene - it was probably when Singer announced the LV partnership, in fact - along comes the Vintage Modern Fastback. CEO Chau Nguyen says his company has “blended classic inspired design with modern safety, technology and performance.” So what we have, ladies and gents, is a brand new S650 Mustang, lovingly rendered in carbon fibre to look like one from the '60s. 

Which is an interesting concept, for sure, especially when so much effort has been invested. VM reckons each build takes around 900 hours to make a Fastback from a new Mustang, with a chunk of that surely accounted for by the carbon panels and new details, from billet aluminium grille and auxiliary lights to dramatic new rear end and prominent scoops. There’ll certainly be no mistaking it for a lightly upgraded GT, if inevitably lacking some of the crispness of an actual GT500 - the Eleanor influence is plain to see - on account of the size.

The retroification of the inside is less extensive (and you might say less successful), with little more to show for the Fastback status than a seat retrim and enough contrast stitching to reach the length of the Hudson. But the sky’s the limit for those who want to go there, with additional Alcantara, leather and aluminium trim possible. Plus you needn’t worry about modern amenities as in a regular restomod, as this is a new Mustang underneath the pleating.

Which means there’s safety stuff still as well. The Fastback is going to be crashed, and meet safety standards, as well as offer the usual array of ABS, ESC, airbags and so on. Again, because of the donor car (and which Mustang owners will continue to disable, at least if YouTube is anything to go by). But for those put off by the compromises of a classic, even a modified one, perhaps something like this is a solution. 

Given how charming the Coyote V8 is as standard, there surely would have been a temptation from Vintage Modern to leave it alone for the Fastback - buyers choose a six-speed manual or 10-speed auto build and that’s it. And that is possible. But it’s so easy to liberate more power from the Ford 5.0 that it almost seems rude not to. So there’s a Whipple supercharger on the options list, for 840hp alongside 615lb ft (on 93 octane). When forking out for a carbon-bodied Mustang, it seems only right to go the whole nine yards.  

Beginning with Broncos almost a decade ago, Nguyen’s Vintage Modern has overhauled 500 trucks so far - demand is apparently beyond production capacity, with expansion coming soon. Meaning they can afford to try something a bit different, basically. Making its debut at Retromobile New York this weekend, it wouldn’t be a surprise if a few Fastbacks are added to that waiting list. Just don’t expect it to come cheap with that much carbon (and stitching). Rather like an original GT500, then…


Author
Discussion

McRors

Original Poster:

471 posts

87 months

While they’ve done a good job with the exterior, I simply can’t see the point. If I wanted a Mustang (and part of me really does) I’d buy an original not an ersatz one. Moreover, the interior is the bit of the car you interact with, so keeping that modern defeats the purpose. Still, I do like the bodywork.

ultrastapler

246 posts

186 months

No

griffsomething

419 posts

192 months

Cool. Just not with all that plastic body kit “Eleanor” crap. Never understood why people love that so much. Ruins the beautiful 60s look.

mac96

6,677 posts

174 months

McRors said:
While they ve done a good job with the exterior, I simply can t see the point. If I wanted a Mustang (and part of me really does) I d buy an original not an ersatz one. Moreover, the interior is the bit of the car you interact with, so keeping that modern defeats the purpose. Still, I do like the bodywork.
That's pretty much my view too. I'd rather have a modern one plus a well restored classic which would also no doubt be cheaper.


Andy86GT

1,227 posts

96 months

At first glance I thought wow, but then I noticed how much more the windscreen is raked, it looks all wrong compared to the original. Also missing the all important side exit exhaust;



Andy86GT

1,227 posts

96 months

mac96 said:
That's pretty much my view too. I'd rather have a modern one plus a well restored classic which would also no doubt be cheaper.
My thoughts too!

Leon R

3,956 posts

127 months

Looks great to me, captures the old rather well.

Demonix

851 posts

243 months

Retrofication looks awful, prefer an unmolested modern Mustang to this body kitted homage. This is one instance where restomodding is better, keep the OG looks but have modern engine, running gear, brakes under the skin

TinpotTintop

160 posts

62 months

Nope. All shades of wrongness. Side profile reminds me of those awful never-to-make-production ideas that pop up from the Middle East. Just no.

WPA

14,881 posts

145 months

McRors said:
While they ve done a good job with the exterior, I simply can t see the point. If I wanted a Mustang (and part of me really does) I d buy an original not an ersatz one. Moreover, the interior is the bit of the car you interact with, so keeping that modern defeats the purpose. Still, I do like the bodywork.
Agreed

MrGeoff

782 posts

203 months

Leon R said:
Looks great to me, captures the old rather well.
Looks like we're in the minority then.

Bluehorseshoe

274 posts

6 months

WPA said:
McRors said:
While they ve done a good job with the exterior, I simply can t see the point. If I wanted a Mustang (and part of me really does) I d buy an original not an ersatz one. Moreover, the interior is the bit of the car you interact with, so keeping that modern defeats the purpose. Still, I do like the bodywork.
Agreed
It is I am sure very well made just not for me

Pauly308

22 posts

21 months

The modern Mustang is a lovely looking car & I think this would work except that the original is far prettier, this is proportionally all wrong, & the massive T.V. screen on the dash ruins an otherwise lovely looking interior.

CABC

6,322 posts

132 months

There are a lot Coyote conversions of 60s cars with suspension & brake upgrades, retrimed interior. Lovely, and a lot less heavy than current Stang

PorkerHam

205 posts

73 months

I can see where they have picked up the retro styling cues, but the result doesn't look like an older car at all.

Aside from the back, It still just looks like a modern Mustang with a sort of Jaguar-inspired bodykit.

Edited by PorkerHam on Friday 20th November 09:06

BigChiefmuffinAgain

1,796 posts

129 months

Answers a question that I am not sure anyone was asking....

cw200

62 posts

180 months

I like it, and I appreciate they have done it in an "I'm glad it exists" kind of way, but I wouldn't buy it. The money that it will no doubt cost, I would rather by a classic and either A) restomod it or B) keep it original and just have another modern car to drive.

richinlondon

915 posts

153 months

it feels a bit to me like one of those ""ferrari"" MR2s


Richard-390a0

3,590 posts

122 months

I got to the third photo & the letterbox ipad for a dash & nope... Maybe in 20yrs an ipad dash will be 'retro'!?!

BlackTank

203 posts

174 months

I like it, but having owned classics before and now a S550 Mustang for nearly 11 years I don't think I'd spend a fortune to mix the 2 experiences. A 2026 6spd S650 Dark Horse is under £60K now - that's a lot of driving experience for that little money. Does spending another £200K to turn it into a mishmash make the driving experience better? No.

But I'll appreciate this if I ever see one in person.