pictures of cannards please

[Gadgeroonie]

can i see some pics of the cannards fitted so i can work out exactly where to fit them

Thanks in advance

[funkybmx1]

If you go on the speed line wheel thread a page back. I put a couple on there that you can see well

[Gadgeroonie]

ta

[Gadgeroonie]

did you stick them on first and then drill when fitted ?

i am thinking double sided tapo and then get the drill out

[funkybmx1]

Na just used masking tape got them lined up. Marked threw the holes. Then drilled then take tape of and bolt up. Some say I used mastic

[Adrian W]

Before you ask, the clams are all over the place, so you fit them where the touch the most

[daddysumo]

funkybmx1 said:

Na just used masking tape got them lined up. Marked threw the holes. Then drilled then take tape of and bolt up. Some say I used mastic

Yep and some are damn sure you couldn't resist...

[funkybmx1]

daddysumo said:

funkybmx1 said:

Na just used masking tape got them lined up. Marked threw the holes. Then drilled then take tape of and bolt up. Some say I used mastic

Yep and some are damn sure you couldn't resist...

[tonyvan]

Adrian W said:

Before you ask, the clams are all over the place, so you fit them where the touch the most

as Adrian says align then up and see where they touch the most get both sides equal then get your drill out and go past the point of no return..LOL

[andygtt]

Masking tape, alight one, make sure othe side can go on same place, tweak till both perfect then drill... Odvious I know but you don't want uneven canards.