Stone guard fitment

[andrewr]

Got a set of stone guards to protect the wheel arch paint from the US.

Anyone know how these attach? Do the screw on or glue on with something.

Also got a proper Ford connector + 6 inches of cable for the reversing light switch, so that I can correct the Noble Factory bodge job. The proper connector is waterproof which stop the connections coroding again.

Thanks in anticipation.

Regards
Andrew

[mgbond]

I glued mine with arledite 2 part epoxy.

Bondy

[alex s]

andrewr said:

Got a set of stone guards to protect the wheel arch paint from the US.

Anyone know how these attach? Do the screw on or glue on with something.

Also got a proper Ford connector + 6 inches of cable for the reversing light switch, so that I can correct the Noble Factory bodge job. The proper connector is waterproof which stop the connections coroding again.

Thanks in anticipation.

Regards
Andrew

sikaflex does the job.

[NobleGuy]

Can I ask where you got them?
And a rough price if that's not too rude.
My arches are looking a bit worse for wear.

[alex s]

Sure I have some left over sets lying around...will have a look at the weekend. ( I did a bulk order about 2 years ago).

[sjc]

alex s said:

Sure I have some left over sets lying around...will have a look at the weekend. ( I did a bulk order about 2 years ago).

Alex, I'll take a set as well if you have some spare please.

[AMG Merc]

Don't drill any holes guys, as said above, just silicon, or similar, and the gaffer tape overnight.