Alloy pipe

[ceebmoj]

Does any one know of a source of custom formed alloy pipe for coolant?

[BlackShadow888]

What sort of forming do you need? What length pipe, approx diameter? Bends needed? Depending on the complexity I may be able to point you in the right direction!

[ceebmoj]

I have not measured up yet but something like 1.50m long with a 90 bend at one end and a kink about 0.40m from the other swagged both ends and a take of pipe welded in near the kink. OD of the pipe 0.04m

[thescamper]

Sure Merlin Motorsport used to do it.

[BlackShadow888]

thescamper said:

Sure Merlin Motorsport used to do it.

This is a fair shout, or failing that - AH Fabrications in Hereford are very good, see the following link: http://www.ahfabrications.com/

[one eyed mick]

+1 for merlin what is it on btw

[JontyR]

Try revotec

Very reasonable prices

[ceebmoj]

Its for a 7 a like with a blade the builder has used long lengths of silicon hose flapping about the place

[AdiT]

Although not as pretty as ally, copper pipe and soldered plumbing fitting work well.

[studog]

Concept Racing in Ross on Wye will sort you out.

Bob's work is fantastic and very reasonably priced.