Taimar pedal assembly

[aureliusTVR]

Having some issues removing the pedal assembly due to a single fixing. Having removed the bolt , the thread fitting has a flared collar on top, which prevents me pulling it down into the footwell. All other fixings were removed without fuss, just this one causing issues
Any advice is welcome.

[62stevew]

I‘m pretty sure the „hole“ you are pointing at , is where the throttle cable comes out. There wasn‘t a bolt in it. Are you sure it‘s stuck on that one ?

[DAKOTAstorm]

62stevew is correct, it’s a bush for the throttle cable. It will be rusted into pedal box housing. Penetrating oil and a lever between fibreglass and pedal box helped me remove mine, along with a lot of jigging and twisting, be careful not to break the fibreglass though!

[aureliusTVR]

Of course, that explains it. I've a rotten memory, I only removed the cable in the last couple of months !. I have taken plenty of photos to compensate. Thank you both. I'll keep applying penetrant and see how I get on.