AJP4.5 anywhere

[kg55]

Does anybody know where there is a 4.5 ajp plus loom airboxes ecu and manifolds. If i don't find one soon the speed six tuscan will not be out for next season. (55 getting very lonely )

[trackcar]

theres a complete cerbera for sale at douglas valley breakers, apparently (according to some on this website) the chassis is so rotten its only really good for parts .. take what you want and sell of the rest ?

[teamHOLDENracing]

Can't help you with the engine itself but I have a brand new 4.5 race engine wiring loom. Owen has a flywheel and bellhousing. And I also have a set of airboxes for the AJP designed for the Sagaris that have the inlet air fed in via two 100mm hoses. Try APM Andy, he may know where an engine might be found....

[GlynnsportRacing]

I have a spare race AJP8 engine (recently refreshed) and probably some of the other bits you're after too. PM me or call on 07748 460 339 if you're intersted. Cheers
steve

[Graham]

Ls3 mate... 4.5k in the uk and 430 bhp.... ( lights blue touch paper and retires)

[darren no 7]

hi i have a race engine and all the other bits needed to fit

[julian64]

Graham said:

Ls3 mate... 4.5k in the uk and 430 bhp.... ( lights blue touch paper and retires)

Where can you possibly find an LS3 for 4.5K??

[V8 GRF]

julian64 said:

Graham said:

Ls3 mate... 4.5k in the uk and 430 bhp.... ( lights blue touch paper and retires)

Where can you possibly find an LS3 for 4.5K??

You can get a 6.2 for £4k + VAT here

Edited by V8 GRF on Wednesday 19th November 17:29

[darren no 7]

they are only 4.5k but after you have bought all the other bits needed to fit it you are in the 10k mark (thats what is going into mine)

Edited by darren no 7 on Wednesday 19th November 17:47

[Graham]

I reckon I can do it or little bit less than that, its the gearbox thats feking expensive, even for the cheap marginal one your looking at 8k from back of the engine to prop.. the higher rated way comes in at about 15k

[teamHOLDENracing]

I can assure you that the engine itself is the cheap bit....!

[Graham]

Darren what dry sump kit are you looking at ?

[darren no 7]

the same one as andys (mosler) but will look at anything

Edited by darren no 7 on Wednesday 19th November 21:59

[teamHOLDENracing]

This is the kiddy on mine. Machined from billet with a 5 stage pump.

A work of art



http://www.daileyengineering.com/oilpans.htm

Bill Dailey was very helpful when I needed to reverse the direction of the pump outlet to fit in the chassis.

[kg55]

Good news guys i have managed to source an ajp from a cerbera a 2004 4.2 model thanks for the offers of help everybody. Good news is 55 WILL be out from the start of next season assuming matt and i get it built by then (still a lot to do). I expect it will be class A so will be very hard just to keep up after a season out.

[sam.mnc]

Good news Kevin, look forward to seeing you on track with us again, I have missed the battles we had with you and your 10000000000 bhp taz and my 1000000000000 bhp fully amazing shiny light clean tazo!!!

Regards

Sam

[kg55]

sam.mnc said:

Good news Kevin, look forward to seeing you on track with us again, I have missed the battles we had with you and your 10000000000 bhp taz and my 1000000000000 bhp fully amazing shiny light clean tazo!!!

Regards

Sam

Class A then young man for me should be good with only 400ish bhp each although i will miss that boost kicking in mid corner ( 50 to 1000+ bhp )