Discussion
I've found my fuel pressure gauge is all over the place ( the manual one on the regulator is fine) the suggestion is its a knackered sensor apparently they do pack up with a lot of vibration.. I've also had a lot of problems with the wiring to my wheel speed sensor, it keeps breaking up, so maybe the age of the loom is a problem...
Put a digital meter on the sensor output and see if the voltage is constant or all over the place, this will let you know if it's the display or sensor.
either that or you may want to connect the sensor output to your DL1, you can then log this information plus you will be able to tell if the sensor is faulty or if it's your dash. make sure you use a non pull-up input in the DL1
either that or you may want to connect the sensor output to your DL1, you can then log this information plus you will be able to tell if the sensor is faulty or if it's your dash. make sure you use a non pull-up input in the DL1
Forums | General Motorsport | Top of Page | What's New | My Stuff


