Scratch build 250f inspired replica.
Discussion
As a kid I loved these cars, my first pedal car was based on one back in the 60s, after retiring and giving up motorcycles, I decided to build one more or less from scratch, I still have access to a machine shop inc CNC equipment etc, but decided to try and do this as it was done historically, using hand tools as much as possible, except a small lathe a Tig set and a Mig set, I could have gone it with just Oxy Acetylene, but don t like having it around the house, and when you get to my age you have to be realistic or it won t get finished.
I started this project a couple of years ago now, and have posted some stuff on other forums where I was looking for specific info on areas such as metal shaping, Alfa Romeo Busso engines etc.
Anyhow for various reasons, after making good initial progress it got stalled, house move from Yorkshire to the Southeast, followed by a year or so of DIY etc etc, during this time I had an ankle joint replacements that subsequently failed catastrophically, and to top it off I awoke from one of the many corrective surgeries to a detached retina, all this is boring I know but it gives context.
I eventually got back into this as my health improved, in fact this thing has helped preserve my sanity.
I believe I ve made good progress in the last 6 months or so, and decided to document it here, initially I will post some of the early stuff over the next couple of weeks or so as time allows, once up to date posting will undoubtedly slow a little, but I will keep it updated.
For those who don t know below is an image of Fangio with a later model 250f.
By way of an introduction I will post a few pic of a couple of bikes I ve built over the years and obviously some images of my progress so far.
As the title suggests this is not an exact replica but the finished car will be pretty close I hope.
Tubular space frame, with an all aluminium body, it will have a 3.0 24v V6 Busso engine which I have mated to an RX8 6speed box, rear wheel drive, I’m also and using some MX5 running gear.
All up weight when finished is anticipated to be around 600kg
Any comments question etc are encouraged.
Shaun

I started this project a couple of years ago now, and have posted some stuff on other forums where I was looking for specific info on areas such as metal shaping, Alfa Romeo Busso engines etc.
Anyhow for various reasons, after making good initial progress it got stalled, house move from Yorkshire to the Southeast, followed by a year or so of DIY etc etc, during this time I had an ankle joint replacements that subsequently failed catastrophically, and to top it off I awoke from one of the many corrective surgeries to a detached retina, all this is boring I know but it gives context.
I eventually got back into this as my health improved, in fact this thing has helped preserve my sanity.
I believe I ve made good progress in the last 6 months or so, and decided to document it here, initially I will post some of the early stuff over the next couple of weeks or so as time allows, once up to date posting will undoubtedly slow a little, but I will keep it updated.
For those who don t know below is an image of Fangio with a later model 250f.
By way of an introduction I will post a few pic of a couple of bikes I ve built over the years and obviously some images of my progress so far.
As the title suggests this is not an exact replica but the finished car will be pretty close I hope.
Tubular space frame, with an all aluminium body, it will have a 3.0 24v V6 Busso engine which I have mated to an RX8 6speed box, rear wheel drive, I’m also and using some MX5 running gear.
All up weight when finished is anticipated to be around 600kg
Any comments question etc are encouraged.
Shaun
Edited by Involute on Tuesday 17th November 15:35
Edited by Involute on Tuesday 17th November 15:36
Edited by Involute on Tuesday 17th November 15:43
As a bit of a taster of what s to come here s a couple of pics of some of the bikes I ve built over the years.
The bottom one is the HCS detail, all machined in my home workshop, prior to getting professionally involved in building bikes and making parts, mainly for the Manx GP and TT, but also WSB and BSB.
This car will not have CNC components as much as poss will be done the old school way.



The bottom one is the HCS detail, all machined in my home workshop, prior to getting professionally involved in building bikes and making parts, mainly for the Manx GP and TT, but also WSB and BSB.
This car will not have CNC components as much as poss will be done the old school way.
hidetheelephants said:
Refusal to use CNC seems hairshirt; CNC can produce things that resemble toolroom products, it just requires careful design and lots of finishing. Ferrari would have build plenty with CNC if he'd had access to it.
Maybe if they do CNC professionally, using other methods is preferred?A bit more details about this project, I started it for a few reasons, after working overseas for years I then got involved in motorsports, mainly the two wheeled variety, but had a brief time with F3 cars about 20 years ago.
When I retired I gave away all my workshop equipment including CNC mill, lathes, welders etc etc, but I kept my hand tools, anyhow after moving, I did all the house repairs etc etc, then got bored, I d had a recent ankle replacement so thought at that point to stop the motorcycle thing, so I decided to build one with 4 wheels, I always loved these long bonnet race cars especially the Moss era ones and particularly the 250f.
I m not a young man consequently I have limited time, but being retired it s all mine.
The plan, space frame, to look authentic as possible, aluminium body home made, What about engine, a replica Maserati 250f engine is not realistic, I wanted a high revving Italian engine, I love the sound of the V6 Busso!
Ive scratch built loads of bikes over the years including the chassis and fuel tanks etc, and I have a small English wheel!, but I ve never made a panel of the size cars use! So I ll need a bigger one, and hope I can do it.
So ill make the chassis, but utilise MX5 nc running gear inc uprights wishbones, hubs discs etc, why! Readily available, good, light, I could make all these but life s too short, so I bought basically both front and rear subframes complete, I then stripped blasted and powder coated some parts, Cerakoted the rest, I did it this way so I can retain the mounting points with its adjustability, obviously these will need some modifications.
Once the chassis is more or less finished, I ll build a sacrificial wireframe directly onto this chassis in order to form the 3d shape and help make the panels.
One of the subframes can be seen on the bench behind the bike.
The engine is a V6 3.0 24v 916 CF2 Alfa Romeo from GTV, it had just under 70,000 miles on it, I know the guy who owned the car which got written off in an accident, so the engine is sound, but I may rebuild it anyway, but new timing belt water pump and crank seals are a definite.
Originally front wheel drive so I’ll marry it to an RX8 gearbox for RWD.
They ll be less chat in the next posts but the above helps explain my rationale.
Cerakote

When I retired I gave away all my workshop equipment including CNC mill, lathes, welders etc etc, but I kept my hand tools, anyhow after moving, I did all the house repairs etc etc, then got bored, I d had a recent ankle replacement so thought at that point to stop the motorcycle thing, so I decided to build one with 4 wheels, I always loved these long bonnet race cars especially the Moss era ones and particularly the 250f.
I m not a young man consequently I have limited time, but being retired it s all mine.
The plan, space frame, to look authentic as possible, aluminium body home made, What about engine, a replica Maserati 250f engine is not realistic, I wanted a high revving Italian engine, I love the sound of the V6 Busso!
Ive scratch built loads of bikes over the years including the chassis and fuel tanks etc, and I have a small English wheel!, but I ve never made a panel of the size cars use! So I ll need a bigger one, and hope I can do it.
So ill make the chassis, but utilise MX5 nc running gear inc uprights wishbones, hubs discs etc, why! Readily available, good, light, I could make all these but life s too short, so I bought basically both front and rear subframes complete, I then stripped blasted and powder coated some parts, Cerakoted the rest, I did it this way so I can retain the mounting points with its adjustability, obviously these will need some modifications.
Once the chassis is more or less finished, I ll build a sacrificial wireframe directly onto this chassis in order to form the 3d shape and help make the panels.
One of the subframes can be seen on the bench behind the bike.
The engine is a V6 3.0 24v 916 CF2 Alfa Romeo from GTV, it had just under 70,000 miles on it, I know the guy who owned the car which got written off in an accident, so the engine is sound, but I may rebuild it anyway, but new timing belt water pump and crank seals are a definite.
Originally front wheel drive so I’ll marry it to an RX8 gearbox for RWD.
They ll be less chat in the next posts but the above helps explain my rationale.
Cerakote
Edited by Involute on Tuesday 17th November 22:27
Involute said:
As a bit of a taster of what s to come here s a couple of pics of some of the bikes I ve built over the years.
The bottom one is the HCS detail, all machined in my home workshop, prior to getting professionally involved in building bikes and making parts, mainly for the Manx GP and TT, but also WSB and BSB.
This car will not have CNC components as much as poss will be done the old school way.



Can you make me some trick monkeybike parts??? The bottom one is the HCS detail, all machined in my home workshop, prior to getting professionally involved in building bikes and making parts, mainly for the Manx GP and TT, but also WSB and BSB.
This car will not have CNC components as much as poss will be done the old school way.



Those bike bits look pant wettingly good.
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff


