Z4 - The cheapest 6 cylinder convertible
Z4 - The cheapest 6 cylinder convertible
Author
Discussion

drgoatboy

Original Poster:

2,036 posts

238 months

I've long been a fan of the z4, which is unusual for me as I'm not generally a BMW kind of guy, but just something about the overall shape and the little ducktail on the boot.....

I've not had a weekend car for a few years after my short and particularly unrewarding venture into Subaru ownership https://www.pistonheads.com/gassing/topic.asp?h=0&...
So the want was very strong for something manual and convertible and importantly cheap. Z4 it is then!



A few more details
-it's the 2.2 straight 6 - 168bhp (so it's brisk rather than fast). Engine sounds lovely and runs smoothly
- It's done 96k miles
- it's only got a little bit of service history
- most everything that should work does (with a few minor exceptions)
- someone has obviously loved it at some point (just maybe not for a while)
- has 7 months MOT and a surprisingly good MOT history

The bad bits
- it's been keyed across several panels
- lots of panels have had paint. Suspect rattle cans
- both rear wings are dented
- the badges are badly faded
- all 4 wheels are badly corroded and kerbed (but have half decent tread although the rears are mismatched)
- The ash tray won't stay shut
- the cupholder won't open
- seems to leak in the rain
- pulls left under breaking.
- Parking sensors don't work
- crappy after market petrol cap
- a bunch of other stuff I haven't discovered yet....










The plan? Drive it for the winter, try and only do small jobs to tidy it up and get everything working. See how I like it.
Let's see...

shalmaneser

6,468 posts

226 months

Nice intro to the world of BMWs & (I guess) straight 6's. Lovely smooth motors, and it's more fun driving a slower car fast than a fast car slow IMO.

spreadsheet monkey

4,826 posts

258 months

Very similar to the 2004 Z4 that I had a few years ago. I owned mine for two years with no mechanical problems and the car had no problem with being left outside in all weathers and sometimes sitting unused for a week or two.

https://www.pistonheads.com/gassing/topic.asp?t=17...

Back in 2020, I wrote "These E85 Z4s are great value at the moment, and a cheap way into the "good old days" of driver-focused six cylinder BMWs" and not much has changed since then - it's still a great value six cylinder sports car.

Huzzah

29,114 posts

214 months

I'm not a BMW fan but do like these, I'd have on in a shot except I need rear seats.

tallpaul26

776 posts

250 months

As someone with a long history of buying cars that needed more money spent on them than made sense (but spending it anyway), to me this looks like a bit of a nail... On the bright side, no mention of rust on the MOT history biggrin

GeniusOfLove

5,953 posts

43 months

Great buy, I'd sort it mechanically, not worry about the cosmetics, and enjoy.

A friend races one and really rates it for durability and how easy it is to work on.

Olivergt

2,291 posts

112 months

Not had a Z4, but plenty of 6 cylinder BMWs, the engines are sublime, super smooth and love to rev.

I've had one 2.2 which was on close to 200k miles and was still silky smooth.

As others have said, sort the mechanical bits out, don't worry about the cosmetics.

Plenty of online help for anything engine related, and most jobs are an easy diy.

Huzzah

29,114 posts

214 months

tallpaul26 said:
As someone with a long history of buying cars that needed more money spent on them than made sense (but spending it anyway), to me this looks like a bit of a nail... On the bright side, no mention of rust on the MOT history biggrin
Agree with this, presumably it was 'throw away' money. Only spend on anything that absolutely needs it, if you like the car sell and buy a tidier example.

Limpet

6,630 posts

192 months

They're good cars with a great owners community, and are pretty nice to work on as well. Very logically engineered and like most BMWs of the time, they use good quality fasteners so things tend to come undone and off without resorting to fire and swearing. The other unusual thing about these is the rear wings are bolt-on which means if you did decide to deal with the damage, in-colour replacements from a breaker might be a good option.

Worth relocating the roof motor to the boot (if it hasn't been done already) and giving the cooling system a good service (thermostat, expansion tank, coolant). Also, the cubby hole between the seats has a courtesy light in it, and it's common for the lid to break and stop turning the light off. Worth sticking a phone in there on record and making sure the light goes out otherwise it'll kill the battery over a few days.

For reasons I can't really explain, neither my better half or I ever clicked with ours. It was a sub 100,000 mile manual 3.0 I picked up at Copart just over a year ago for a steal (£700 + fees) with minor (and strictly cosmetic) front end damage. I spent a few hundred quid and a couple of weekends repairing it, got an MOT on it and we put it into daily use. Owed me about £1,200 in this picture.



In the year we had it, it never so much as hiccupped save for a thermostat sticking open, made a lovely noise, and went very well indeed, but there was something about it that meant we never fell in love with it. It certainly wasn't anything the car did (or didn't do). Got an offer I couldn't refuse from a friend a few months ago which more than doubled my investment, so I moved it on. He has fallen for it. Has already dealt with the dodgy black wheels, dealt with the few minor outstanding jobs on it, and made it cosmetically pretty much perfect. He's an ex-BMW tech, so it's in great hands.



Edited by Limpet on Monday 16th November 20:54

Mr Tidy

31,922 posts

158 months

They have been a bargain for a few years offering plenty of bang for the buck.

I hadn't had a straight 6 BMW until I bought a Z4 Coupe in 2014. I loved it so much I've been running 2 ever since!

Picked up number 7 today. laugh

AlexGSi2000

824 posts

225 months

Nice find.

If you get bored of the engine - like I did in my Z3, the 3.0 engine is a direct replacement.
I purchased an engine from a breaker for £600 and went from 170bhp to 230bhp over the course of a weekend.
Only thing I needed to do was have the ECU flashed with 3.0 calibration.

drgoatboy

Original Poster:

2,036 posts

238 months

Yesterday (14:06)
quotequote all
Thanks everyone for your comments, even if I suspect a few of you may think I have made a horrible mistake!

spreadsheet monkey said:
https://www.pistonheads.com/gassing/topic.asp?t=17...
Back in 2020, I wrote "These E85 Z4s are great value at the moment, and a cheap way into the "good old days" of driver-focused six cylinder BMWs" and not much has changed since then - it's still a great value six cylinder sports car.
Agreed, these seem like an amazing bargain at the moment. I can't buy a ford fiesta for the same price but I can get a 6 cylinder sports car....

Huzzah said:
Agree with this, presumably it was 'throw away' money. Only spend on anything that absolutely needs it, if you like the car sell and buy a tidier example.
This was properly shed money. I'm trying to be sensible about not spending a fortune on it and see how I like it....

The car got the most extreme shake down I could think of yesterday. M25 commute on a rainy, dark, November morning. And to be fair it worked pretty well. Engine was lovely, gearbox surprisingly good. Heaters worked. Wipers squeaked like crazy! The front end is horrible, really vague and tramlines like, well a tram. Needs sorting, more on that later.

On a positive note the dive left under braking has been hugely improved by sorting tyre pressures.

I did spot a little puddle in the passenger footwell.



First thing to do was to check the drain holes. Back wheels off, roof down. Top and bottom of drains checked and running fine. Top of the hole is just behind the seatbelt towers and drains just in front of the rear wheels.



Good news whilst having a poke around is it looks like it's had new rear shocks in the not too distant past! Win!!

Also looked at the windscreen scuttle panel.


This is meant to sit tight to the windscreen and be a rubber seal. It was neither. This part is well known in e85 circles for going brittle and breaking. So off it came. Lots of gumifledge applied and a little stick on seal applied that I had lying around.



Luckily all the clips were there (although I don't think any were actually clipped in) and the original seal although dry only had a couple of small cracks in it.
Clipped back in and looking much better and now tight to the windscreen



Whilst driving I did get a little leak through the drivers window where it meets the roof. I reset the windows. Whether that helps time will tell. I need to treat the seals too if it ever stops raining.



While the wheel was off I could get a real feel for how bad that are. Yuck



So I tried for the first time a poly stripping disc on my grinder.



What an amazing bit of kit!! I only stripped the insides as I wanted to just tidy them up a bit without a proper refurb. Only took about 5 mins to strip off all the old paint and corrosion.



I got some cheap primer, silver paint and lacquer from Toolstation and gave the backs a quick once over. The faces still look terrible but sorting the backs makes a big difference visually. Stupidly I didn't get a decent picture but you get the idea. The backs looks so bad it really drags the car down, and considering how scruffy it is that really says something.
Didn't even use half a can so hopefully will have enough to do at least 2 more wheels as and when. Should be less than £6 per wheel....



Next job is investigate the front end. Suspect lollipop bushes are shot....

Limpet

6,630 posts

192 months

Good work!

drgoatboy said:
Next job is investigate the front end. Suspect lollipop bushes are shot....
That would be my guess as well.

They are a bit of a pain to fit if you're working on your back on the ground. There's a metal reinforcing plate on the subframe that has to come off to access them (nothing too difficult), but they are a very tight fit over the arm, and will need lots of soap and water and probably a BFH. If the condition of the other two balljoints on the arm are suspect, you can buy complete arms with the lollipop bushes already fitted.

Lollipop bushes transformed mine. Much less prone to tramlining and felt a lot sharper.

Sitcat

69 posts

6 months

My high mileage z3 also tramlined horribly on the M25, M20 etc but then flew along arrow straight on french autoroutes.