Scratch build 250f inspired replica.
Scratch build 250f inspired replica.
Author
Discussion

Involute

Original Poster:

10 posts

Tuesday
quotequote all
As a kid I loved these cars, my first pedal car was based on one back in the 60s, after retiring and giving up motorcycles, I decided to build one more or less from scratch, I still have access to a machine shop inc CNC equipment etc, but decided to try and do this as it was done historically, using hand tools as much as possible, except a small lathe a Tig set and a Mig set, I could have gone it with just Oxy Acetylene, but don t like having it around the house, and when you get to my age you have to be realistic or it won t get finished.

I started this project a couple of years ago now, and have posted some stuff on other forums where I was looking for specific info on areas such as metal shaping, Alfa Romeo Busso engines etc.
Anyhow for various reasons, after making good initial progress it got stalled, house move from Yorkshire to the Southeast, followed by a year or so of DIY etc etc, during this time I had an ankle joint replacements that subsequently failed catastrophically, and to top it off I awoke from one of the many corrective surgeries to a detached retina, all this is boring I know but it gives context.

I eventually got back into this as my health improved, in fact this thing has helped preserve my sanity.

I believe I ve made good progress in the last 6 months or so, and decided to document it here, initially I will post some of the early stuff over the next couple of weeks or so as time allows, once up to date posting will undoubtedly slow a little, but I will keep it updated.
For those who don t know below is an image of Fangio with a later model 250f.
By way of an introduction I will post a few pic of a couple of bikes I ve built over the years and obviously some images of my progress so far.

As the title suggests this is not an exact replica but the finished car will be pretty close I hope.
Tubular space frame, with an all aluminium body, it will have a 3.0 24v V6 Busso engine which I have mated to an RX8 6speed box, rear wheel drive, I’m also and using some MX5 running gear.
All up weight when finished is anticipated to be around 600kg

Any comments question etc are encouraged.

Shaun







Edited by Involute on Tuesday 17th November 15:35


Edited by Involute on Tuesday 17th November 15:36


Edited by Involute on Tuesday 17th November 15:43

rdodger

1,094 posts

234 months

Tuesday
quotequote all
Looking forward to this!

tight fart

3,621 posts

304 months

Tuesday
quotequote all
One of my most memorable motoring memories is following Tiff Needell driving a 250f around the Nurburgring, I’m following with interest and looking forward to some pics.

SlowWinter

22 posts

42 months

Tuesday
quotequote all
Photos please, this sounds so so good

Involute

Original Poster:

10 posts

Tuesday
quotequote all
As a bit of a taster of what s to come here s a couple of pics of some of the bikes I ve built over the years.
The bottom one is the HCS detail, all machined in my home workshop, prior to getting professionally involved in building bikes and making parts, mainly for the Manx GP and TT, but also WSB and BSB.
This car will not have CNC components as much as poss will be done the old school way.






Huff

3,449 posts

222 months

Tuesday
quotequote all
Oh my; with that level of ability - this is going to be orsum!
Subscribed : )

Mr Tidy

31,922 posts

158 months

Tuesday
quotequote all
Wow, this is going to be fantastic!

gf15

1,040 posts

297 months

Tuesday
quotequote all
I’m in.

Mikebentley

8,715 posts

171 months

Tuesday
quotequote all
Amazing

hidetheelephants

36,454 posts

224 months

Tuesday
quotequote all
Refusal to use CNC seems hairshirt; CNC can produce things that resemble toolroom products, it just requires careful design and lots of finishing. Ferrari would have build plenty with CNC if he'd had access to it.

TGCOTF-dewey

8,032 posts

86 months

Tuesday
quotequote all
hidetheelephants said:
Refusal to use CNC seems hairshirt; CNC can produce things that resemble toolroom products, it just requires careful design and lots of finishing. Ferrari would have build plenty with CNC if he'd had access to it.
Maybe if they do CNC professionally, using other methods is preferred?


hidetheelephants

36,454 posts

224 months

Tuesday
quotequote all
The alternative is mainly casting/forging and then machining, while the OP may be itching to set up a home foundry I don't think that's advisable for safety-critical items.

Paul S4

1,315 posts

241 months

Tuesday
quotequote all
While not a great fan of the recent Wheeler Dealers TV series.......I seem to recall that Ant Anistead built a similar replica from the ground up.....

Are you basing the chassis design upon the original Maserati?

Involute

Original Poster:

10 posts

Tuesday
quotequote all
A bit more details about this project, I started it for a few reasons, after working overseas for years I then got involved in motorsports, mainly the two wheeled variety, but had a brief time with F3 cars about 20 years ago.
When I retired I gave away all my workshop equipment including CNC mill, lathes, welders etc etc, but I kept my hand tools, anyhow after moving, I did all the house repairs etc etc, then got bored, I d had a recent ankle replacement so thought at that point to stop the motorcycle thing, so I decided to build one with 4 wheels, I always loved these long bonnet race cars especially the Moss era ones and particularly the 250f.
I m not a young man consequently I have limited time, but being retired it s all mine.
The plan, space frame, to look authentic as possible, aluminium body home made, What about engine, a replica Maserati 250f engine is not realistic, I wanted a high revving Italian engine, I love the sound of the V6 Busso!
Ive scratch built loads of bikes over the years including the chassis and fuel tanks etc, and I have a small English wheel!, but I ve never made a panel of the size cars use! So I ll need a bigger one, and hope I can do it.
So ill make the chassis, but utilise MX5 nc running gear inc uprights wishbones, hubs discs etc, why! Readily available, good, light, I could make all these but life s too short, so I bought basically both front and rear subframes complete, I then stripped blasted and powder coated some parts, Cerakoted the rest, I did it this way so I can retain the mounting points with its adjustability, obviously these will need some modifications.
Once the chassis is more or less finished, I ll build a sacrificial wireframe directly onto this chassis in order to form the 3d shape and help make the panels.
One of the subframes can be seen on the bench behind the bike.
The engine is a V6 3.0 24v 916 CF2 Alfa Romeo from GTV, it had just under 70,000 miles on it, I know the guy who owned the car which got written off in an accident, so the engine is sound, but I may rebuild it anyway, but new timing belt water pump and crank seals are a definite.
Originally front wheel drive so I’ll marry it to an RX8 gearbox for RWD.
They ll be less chat in the next posts but the above helps explain my rationale.

Cerakote



Edited by Involute on Tuesday 17th November 22:27

Cupid-stunt

3,382 posts

87 months

Tuesday
quotequote all
Not my era, but I do like the look of these long fronted racers.
Looking forward to what you can put together on 4 wheels - if the 2 wheeled variety is anything to go by, it's going to be spectacular!

TGCOTF-dewey

8,032 posts

86 months

Yesterday (05:24)
quotequote all
Slightly off topic, but is that Tesi front end or your own design?

Gad-Westy

16,666 posts

244 months

Yesterday (07:03)
quotequote all
Along for the ride on this one. Great project.

Lefty

21,617 posts

233 months

Yesterday (07:29)
quotequote all
Love the concept. Are you going to try and make it road legal or is this just for track days?

supacool1

746 posts

210 months

Yesterday (08:18)
quotequote all
Involute said:
As a bit of a taster of what s to come here s a couple of pics of some of the bikes I ve built over the years.
The bottom one is the HCS detail, all machined in my home workshop, prior to getting professionally involved in building bikes and making parts, mainly for the Manx GP and TT, but also WSB and BSB.
This car will not have CNC components as much as poss will be done the old school way.





Can you make me some trick monkeybike parts??? biggrinbiggrinbiggrin

Those bike bits look pant wettingly good.

generationx

9,358 posts

136 months

Yesterday (08:56)
quotequote all
Watching with enthusiastic interest!