Jack Pads
Author
Discussion

Prof Beard

Original Poster:

6,669 posts

258 months

Friday 27th July 2012
quotequote all
I noticed these:

http://www.ebay.co.uk/itm/160836730739?ssPageName=...

are they a good idea/worth having?

anonymous-user

85 months

Friday 27th July 2012
quotequote all
Should think they're ok if you have a jack low enough to go under them when fitted.

Richard Hamilton

525 posts

292 months

Friday 27th July 2012
quotequote all
I've got one. Works well, but as has been said, you need a low entry jack.

hopeydaze

323 posts

181 months

Friday 27th July 2012
quotequote all
I use an ice hockey puck, also available on eBay. about £3

gsewell

724 posts

314 months

Friday 27th July 2012
quotequote all
I prefer a hockey puck because the metal pad has a key that can turn in the slot in the jacking point on the car. With my jack, the diameter of the pad is exactly right to then get lodged in the teeth of the support cup on the jack. So, when I finish working on the car and drop the jack, the pad does not disengage with the car and the jack cannot be removed unless you move the jack through however many degrees to get the slot and key to line up.


NBTBRV8

2,066 posts

239 months

Friday 27th July 2012
quotequote all
I would say no. I bought a set and returned them as I think that they were way too small and a loose fit in the slot.

Magic919

14,593 posts

232 months

Friday 27th July 2012
quotequote all
I've got one and I'd recommend it.

graemel

7,230 posts

248 months

Friday 27th July 2012
quotequote all
A piece of carpet does the job.

Wozy68

5,436 posts

201 months

Saturday 28th July 2012
quotequote all
graemel said:
A piece of carpet does the job.
Eh?


melv

4,708 posts

296 months

Saturday 28th July 2012
quotequote all
hopeydaze said:
I use an ice hockey puck, also available on eBay. about £3
+ 1...

anonymous-user

85 months

Saturday 28th July 2012
quotequote all
graemel said:
A piece of carpet does the job.
Agreed. Or a piece of thin rubber sheeting.

Wozy68

5,436 posts

201 months

Saturday 28th July 2012
quotequote all
I've bought a pair and think they are great.

It's not far off impossib;e to get a jack under a 993 without some kind of curcular spacer between underbody and jack. The underside of mine and the arch liners are cracked becuase of some numpty not locating the jack correctly in the past. Carpet or rubber strips would be no good. Well not on my C2 at least.

Now its simple, locate and turn to lock the pads under the car (the inner ones at least on a 993) and jack up and on to them. Brilliant.

Just remember to remove them before driving off.