Has anyone used Ferodo DS2500 on a Tuscan?
Has anyone used Ferodo DS2500 on a Tuscan?
Author
Discussion

lowest

Original Poster:

296 posts

248 months

Monday 9th October 2006
quotequote all
Has anyone used Ferodo DS2500 on a Tuscan?

chalky white

421 posts

239 months

Monday 9th October 2006
quotequote all
I would also be interested in a comparison between these and the standard Tuscan Pads. just picked up a set of standard rears from a dealer after weeks of chasing. Apparently none have been manufactured for about 8 months.

I understand that Chim/Cerb pads will fit the rear but are the wrong compound and can cause rear lockups under hard braking? True/False?

lowest

Original Poster:

296 posts

248 months

Tuesday 10th October 2006
quotequote all
Not sure about the Chim/Cerb bit but I don't seem to have any trouble finding pads just looking for some that work and last more than one track day. Steer clear of EBC Red Stuff if you can.... I had a very bad experience with those following a day on Brands Hatch GP circuit with new pads fitted I had no brakes on the way home.

yi8tvr

1,105 posts

274 months

Tuesday 10th October 2006
quotequote all
Its a matter of preference. I use Ferrodo 2500 on my T350 which is only used for track days. Tailslide uses 2500 as well. Never ever had a problem with brake fade since fitting them.. Be carefull on the scalloped part of the brake some need it some dont.

Mark..

basil brush

5,528 posts

287 months

Tuesday 10th October 2006
quotequote all
I've had ds2500s in my standard Tuscan for about 3 months. They are miles better (and cheaper) than the TVR compound. I found the TVR ones to lack bite and fade under heavy use. It also improves the handbrake performance.

I do have a problem with my rears locking up first though, but it did that before. I understand TVR have a habit of not getting the balance right on a lot of their cars.

yi8tvr

1,105 posts

274 months

Wednesday 11th October 2006
quotequote all
basil brush said:
I've had ds2500s in my standard Tuscan for about 3 months. They are miles better (and cheaper) than the TVR compound. I found the TVR ones to lack bite and fade under heavy use. It also improves the handbrake performance.

I do have a problem with my rears locking up first though, but it did that before. I understand TVR have a habit of not getting the balance right on a lot of their cars.


Is it the brakes or is it engine braking at high revs. Not sure about TVR not getting the balance right i find them pretty well spot on..?

lowest

Original Poster:

296 posts

248 months

Wednesday 11th October 2006
quotequote all
I've gone for both DS3000 and DS2500 to see which I like best. I'll post the results after Saturady.

basil brush

5,528 posts

287 months

Wednesday 11th October 2006
quotequote all
yi8tvr said:
basil brush said:
I've had ds2500s in my standard Tuscan for about 3 months. They are miles better (and cheaper) than the TVR compound. I found the TVR ones to lack bite and fade under heavy use. It also improves the handbrake performance.

I do have a problem with my rears locking up first though, but it did that before. I understand TVR have a habit of not getting the balance right on a lot of their cars.


Is it the brakes or is it engine braking at high revs. Not sure about TVR not getting the balance right i find them pretty well spot on..?


It's the brakes, as I've dipped the clutch when I've been testing it. A few other people have had the same issue.

yi8tvr

1,105 posts

274 months

Wednesday 11th October 2006
quotequote all
basil brush said:
yi8tvr said:
basil brush said:
I've had ds2500s in my standard Tuscan for about 3 months. They are miles better (and cheaper) than the TVR compound. I found the TVR ones to lack bite and fade under heavy use. It also improves the handbrake performance.

I do have a problem with my rears locking up first though, but it did that before. I understand TVR have a habit of not getting the balance right on a lot of their cars.


Is it the brakes or is it engine braking at high revs. Not sure about TVR not getting the balance right i find them pretty well spot on..?


It's the brakes, as I've dipped the clutch when I've been testing it. A few other people have had the same issue.


Well i have not heard of that one ? Hope you get that sorted asap, could be nasty with winter upon us..

GarryM

1,113 posts

307 months

Wednesday 11th October 2006
quotequote all
basil brush said:
yi8tvr said:
basil brush said:
I've had ds2500s in my standard Tuscan for about 3 months. They are miles better (and cheaper) than the TVR compound. I found the TVR ones to lack bite and fade under heavy use. It also improves the handbrake performance.

I do have a problem with my rears locking up first though, but it did that before. I understand TVR have a habit of not getting the balance right on a lot of their cars.


Is it the brakes or is it engine braking at high revs. Not sure about TVR not getting the balance right i find them pretty well spot on..?


It's the brakes, as I've dipped the clutch when I've been testing it. A few other people have had the same issue.


Just a comment (please don't take offence) - if you brake hard from high speed and dip the clutch (as you describe) the car will feel far less balanced compared to doing the same thing and dipping the clutch at the last possible moment i.e. just before you would stall the engine. You are far more likely to lock the rears if you dip the clutch. I have a Griff which people regularly say has rear brake bias but like Mark, I find it spot on.

basil brush

5,528 posts

287 months

Thursday 12th October 2006
quotequote all
GarryM said:
basil brush said:

It's the brakes, as I've dipped the clutch when I've been testing it. A few other people have had the same issue.


Just a comment (please don't take offence) - if you brake hard from high speed and dip the clutch (as you describe) the car will feel far less balanced compared to doing the same thing and dipping the clutch at the last possible moment i.e. just before you would stall the engine. You are far more likely to lock the rears if you dip the clutch. I have a Griff which people regularly say has rear brake bias but like Mark, I find it spot on.


No problem. I like to listen to all opinions.

I didn't mean that I'd just dipped the clutch and jumped on the brake pedal. I was trying to find the lock up point of the brakes when braking hard from about 60 or so, and was trying to gradually increase the effort. I dipped the clutch when the engine speed was getting low and was surprised that the rears locked up, sending it sliding to one side I guess at around 25 mph or so. The fronts didn't even try to lock up.

I'm going to look into it further as the car has sometimes been a bit lively under hard braking.

GarryM

1,113 posts

307 months

Thursday 12th October 2006
quotequote all
basil brush said:
I didn't mean that I'd just dipped the clutch and jumped on the brake pedal. I was trying to find the lock up point of the brakes when braking hard from about 60 or so, and was trying to gradually increase the effort. I dipped the clutch when the engine speed was getting low and was surprised that the rears locked up, sending it sliding to one side I guess at around 25 mph or so. The fronts didn't even try to lock up.

I'm going to look into it further as the car has sometimes been a bit lively under hard braking.


Until it was pointed out to me a few years ago, I was dipping the clutch just a moment or so after applying the brake. I was probably taught that 20 odd years ago (doing emergency stops from 30mph! ) but it is really inappropriate for TVRs - the difference is very obvious when you leave the clutch right up to the point of stalling. The other thing is that until I started track driving I had never practiced or had instruction on how to brake from high speed. My car felt very twitchy to start with and I latched on to the "TVRs have too much rear bias" mantra. A couple of more knowledgeable drivers and my garage advised me that the balance was fine and suggested I would get used to it after a bit of practice. They were right.

I'm not suggesting it's the same for you - your situation doesn't sound right at all. It sounds like you need a thorough service of the brakes. Good luck!

lowest

Original Poster:

296 posts

248 months

Tuesday 24th October 2006
quotequote all
I'm not sure if anyone will be interested but I used the DS3000 pads at Bedford on the GT circuit and they were great plus they're still good. There is a lot of brake squeel with them but that's a small price to pay for stopping!! I'll let you know about the DS2500 when they're tried but I would recommend the DS3000 so far.

pentoman

4,835 posts

287 months

Tuesday 24th October 2006
quotequote all
I am interested because I need some tracky pads for my Merc and 2500's come up as a suggestion.

Don't like the idea of squealy 3000's though, especially as I often commute in this car.

lowest

Original Poster:

296 posts

248 months

Tuesday 24th October 2006
quotequote all
I'm just going to try some anti squeal pads from Clever Trevor soI'll let you know how they help. Do you track the car? If not the DS2500 might be a better option anyway and I have a spare set too!!