Ok so i removed the 2 screws and then guess what...
Discussion
....nothing, these are the dash screws I am talking about. Took me an hour and a half to take them out, went to remove the dash and all it would do is lift up a few inches and that's it. It will not budge away from the windscreen. Its almost as if there is a secret screw somewhere!. Does it need a really good pull;) I have an early MK1. All the advice needed
Thanks
Thanks
I took mine out yesterday, took 5 minutes to undo the bolts then just pull upwards. The only thing it could stick on are the air pipes on the passenger side. I think you just need to pull harder.
These threads may help:
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
These threads may help:
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
Ok I will give it another go, leter. 5 mins!!!!, passenger side was easy I have to say, but the drivers side I just could not get the right angle at all. This is all for the radio which does not sit correctly in the pod, as I fit the radio back it pushes out of the pod I think the wires are the problem so I am trying to stow them away under the dash. Must pull harder 

Message Board | Tuscan | Top of Page | What's New | My Stuff



