Bleeding the clutch

[Toady1]

Hi, I've just replaced the clutch and it seems that there must be some air in it still as there is too much free movement at the top of the pedal. Is there any tricks to bleeding the tuscan clutch? What a PITA the resevoir is to fill too!!!

[Walford]

I have a short piece of tube on a suringe

You should always set the pedal stop after working on the clutch
if you open it to far its fooked

Edited by Walford on Saturday 22 September 12:10

[paulvx220T]

I had the same problem, the take off for the clutch is very close to the top of the fluid resevoir you have to keep the fluid topped up otherwise if it drops only a small ammount you keeping dragging in air.