Indicator beep?

[robsco]

Hi all.

I'm looking to turn this back up as it is silent at the moment. Where can I find the control for this please?

[gralin69]

Press large rotary switch and fog at same time this will bring up menu press large knob twice to move cursor down to option(volume 0-9) rotate large knob to increase goes up to 9 in vol then press fog again breifly to set

[robsco]

Thanks for this, but the volume is already up in the menu. Is this not for the beep that accompanies the shift light? The Cerb's was on a little circuit board somewhere, I thought it would be the same here?

[gralin69]

pretty sure its the same for volume have you turned it down to 0 then back up again mine losses volume and when fully down back up i get an ear piercing beep dont know where the sounder is though

[drivingfroggy]

The beep sounder is a white circular thingy on the forward upper face of the pcb stack in the dash pod. If one of the two little wire legs is broken or not soldered properly the beep will not sound

[Macey]

Leave it silent, Winter is coming and mine was always beeping due to outside temps being below 3 degrees. you can override it but mine just kept on beeping. Bloody annoying so I turned it off.

[Cockey]

Mine's off too. Decided to turn it back on a few weeks ago, but within a couple of days I was reminded why I had turned it off in the first place. Too annoying.

[robsco]

Thanks guys. So the volume control in the menu is for the indicators? I'm absolutely positive I've heard the shift beep before but not the indicator, hence the confusion. As it happens, I have the dash apart at the moment, and I was expecting to see a volume control of some description, but there isn't. I should try resoldering it.

[robsco]

I have soldered a new indicator buzzer in tonight and reconnected everything up, and I still don't have a beep? The volume is up to 9 in the menu, I can't work out why it is not working. Does anyone have any ideas?