Wheel nuts

[harp]

Don't know if this is a stupid question or not but are the wheel nut fitments the same on the Tuscan, Griffith and Chimaera? So will the wheel nuts for a Griffith fit a Tuscan or a Chimaera?

Edited by harp on Saturday 3rd March 14:21

[R TOY]

Almost certain that they are the same except that Grif/chim500 alloys have covered nuts and dont need to be shiny, not that many tvr nuts stay shiny for long anyway.Most owners have 'shinynuts' fitted which are stainless and do stay shiny. Be on a website if you google and will confirm if the same.

[Full SP]

They're not the same. Griff/ Chim use M12x1.5 whereas Tuscan, T350, Tam, Sag use M12x1.25. Cerbera use 1/2" UNF and early Tuscan have the same (these early Tuscans are normally identifiable by the front calipers which are the same as the Cerbera).

[R TOY]

Ok, i stand corrected then.

[Full SP]

It's my job... no doubt you could give me a fair old pasting on farming matters. Though, reading it back, my post could seem a little abrupt - it wasn't meant to be.

[R TOY]

Your post is fine, I did wonder 'how the hell does this guy know all that?' but a glance at your prof explained all. Err, any farming questions anyone??

[S6PNJ]

Resurection time! Anyone know what the nuts are from originally? I'm looking to get some locking ones and want to see what options are available. Cheers!

[S6PNJ]

Anyone any information? I'm sure lots of you out there have locking wheel nuts and have a variety of different makes and types.