Tuscan 2 2004 - diagnostics code C
Discussion
Marcel_PL said:
Diagnostics code C. Doese anyone know what doese it refer to ? Is it possible to fix it without help of authorised service?
Here you go all the Dia CodesA - Speedo not activating zero switch/switch failed/open circuit
B - Speedo not releasing zero switch/switch failed/short to earth
C - Water not activating zero switch/switch failed/open circuit
D - Water not releasing zero switch/switch failed/short to earth
E - Fuel not activating zero switch/switch failed/open circuit
F - Fuel not releasing zero switch/switch failed/short to earth
G - Water temperature sensor input open circuit
H - Air temperature sensor input open circuit
I - Oil temperature sensor input open circuit
J - Oil pressure sensor input open circuit
K - Fuel level sensor input open circuit
L - Erratic road speed signal input
M
N
O - No communication between analogue and control up
HTH
Code C is the metal water temp gauge on the dash moving past a microswitch. Sometimes you can fix it by taking the dash to bits and straightening the pin. Sometimes you can't :-(
When I got my Tuscan over a year ago is had this prob and the dealer wanted to send the dash to TVR to fix. Needless to say I still have a code C error !!
I think there are indies out there that can fix this relatively easily.
Hope that helps
When I got my Tuscan over a year ago is had this prob and the dealer wanted to send the dash to TVR to fix. Needless to say I still have a code C error !!
I think there are indies out there that can fix this relatively easily.
Hope that helps
ec1 eex said:
Are the diagnostic codes the same for the Tuscan 2 then?
Phil (a Tuscan 1 owner)
No idea. I don't get any of the error messages that I got with my Tuscan1 (except the efi one) but I would imagine they are the same? Phil (a Tuscan 1 owner)
This is my favourite;
L - Erratic road speed signal input
Translation "put your foot down you pussy".

Message Board | Tuscan | Top of Page | What's New | My Stuff





I cant understand english cars ....