Electric Door Mirror Control - Who Can Fix it?
Discussion
If it's the door mirror switch to open the door, then I recently fitted this and found it to operate superbly (from Maplins)
There is sufficient clearance within the mirror housing, and a very simple 2 wire connection. It also has the couple of second delay mimicking the original switches. You'll need to enlarge the opening for securing the switch by just a few mms but easily done.
It also is sleeker, therefore even less drag than the original switch lol

If you're on about the mirror adjustment switch then no idea I am afraid, other than the obvious, taking the door card off and checking for loose wires/connections and maybe a dose of WD or something to ensure that there is no moisture making it play up.
HTH
There is sufficient clearance within the mirror housing, and a very simple 2 wire connection. It also has the couple of second delay mimicking the original switches. You'll need to enlarge the opening for securing the switch by just a few mms but easily done.
It also is sleeker, therefore even less drag than the original switch lol

If you're on about the mirror adjustment switch then no idea I am afraid, other than the obvious, taking the door card off and checking for loose wires/connections and maybe a dose of WD or something to ensure that there is no moisture making it play up.
HTH
Message Board | Tuscan | Top of Page | What's New | My Stuff


