HELP! In Spain will not start
Discussion
Code C says Water level sensor not activating not activating zero switch... which is probably irrelevant
Assuming no cranking,no fuel pump
Is the immobiliser light on solid (not flashing)..if so Disconnect immoboliser unit completely and reconnect
Check Initial/bump switch in boot above fuel tank has not become disconnect
Otherwise fuses or relays await more info but off to play golf now
Assuming no cranking,no fuel pump
Is the immobiliser light on solid (not flashing)..if so Disconnect immoboliser unit completely and reconnect
Check Initial/bump switch in boot above fuel tank has not become disconnect
Otherwise fuses or relays await more info but off to play golf now
Edited by glow worm on Sunday 18th April 11:27
glow worm said:
Code C says Water level sensor not activating not activating zero switch... which is probably irrelevant
Assuming no cranking,no fuel pump
Is the immobiliser light on solid (not flashing)..if so Disconnect immoboliser unit completely and reconnect
Check Initial/bump switch in boot above fuel tank has not become disconnect
Otherwise fuses or relays await more info but off to play golf now
Done that,Assuming no cranking,no fuel pump
Is the immobiliser light on solid (not flashing)..if so Disconnect immoboliser unit completely and reconnect
Check Initial/bump switch in boot above fuel tank has not become disconnect
Otherwise fuses or relays await more info but off to play golf now
However it did bump start OK, so my be an engine earth/ground cable
Fuel pumps were running
G
Message Board | Tuscan | Top of Page | What's New | My Stuff


