Radiator
Radiator
Author
Discussion

Tuscan Wil

Original Poster:

422 posts

215 months

Tuesday 24th March 2009
quotequote all
Found a small puddle of water on the garage floor and saw some water dripping from the car, I guess the radiator is leaking. Is it expensive to fixed? Just had a 12K services a month ago and surprised no one spotted it...any advices?

Daston

6,148 posts

232 months

Tuesday 24th March 2009
quotequote all
could just be a hose in which case not much to fix. If its the Rad then they are around the £375 mark and can be fitted in an afternoon if you have the garage space.

Tuscan Wil

Original Poster:

422 posts

215 months

Tuesday 24th March 2009
quotequote all
Thanks Dave, phew at least it doesn't sound like it is going to cost an arm and a leg. Forgot to mentioned that I did take her out for a short spin on Sunday, and I have been keeping my eyes on the water temperature, it does seem quite stable. At least it didn't shoot up to 120 degree. I hope it is the hose.

so called

9,160 posts

238 months

Wednesday 25th March 2009
quotequote all
Is your coolant low ?
Is the water coming from the front nearside ?
It could be the pipe connection to your screen washer tank

Lucozade

2,574 posts

308 months

Wednesday 25th March 2009
quotequote all
just had mine replaced. Apparently the ones fitted at the factory were crap on the later models.

Tuscan Wil

Original Poster:

422 posts

215 months

Wednesday 25th March 2009
quotequote all
so called said:
Is your coolant low ?
Is the water coming from the front nearside ?
It could be the pipe connection to your screen washer tank
It comes from off side at the front.

The Surveyor

7,624 posts

266 months

Wednesday 25th March 2009
quotequote all
Guys

Before spending a pile of cash on a replacement radiator, try and get the old one fixed. They have a tendancy to open-up where the plastic end caps are crimped onto the alloy core. They often just need resealing which stops the leak.

Take it along to a local radiator specialist and see if they can repair it before shelling out £350+. A repair with presure test will cost a fraction of the cost of new and it isn't rocket science to remove and refit thumbup

Paul

glow worm

7,406 posts

256 months

Wednesday 25th March 2009
quotequote all
I've been told to bin the plastic factory one and install an aluminium one, the heat exchange is far better.

Lucozade

2,574 posts

308 months

Thursday 26th March 2009
quotequote all
glow worm said:
I've been told to bin the plastic factory one and install an aluminium one, the heat exchange is far better.
Been told the same - was it from the same person cool


kingofhearts1961

52 posts

211 months

Tuesday 28th April 2009
quotequote all
removed mine took it to a place in beckenham had the copper and brass replacement cost £130

Andy_350z

116 posts

230 months

Wednesday 29th April 2009
quotequote all
had a alu one fitted yesterday by tvr power £630 all in.