drivers door doesnt open

[mhardy]

Today the drivers door wont get open...not on the mirorbuton and not at the inside switch..? any idea how to open it or what the problem could be?

Battery is fine..

Thanks
Matthijs

[asrovak]

Sound like a fuse blown. Dont know which one tho - sorry

[rens914]

ik heb je een pm gestuurd
bel me anders even
0629078859
rens

[mhardy]

Thanks Rens!

Will try that and check the connections behind the doorcard

matthijs

[rens914]

there's nothing behind the doorcard
the connection is behind the pillar under the safetybelt
undo a screw at the bottom, move the seat forward, take of the door rubber and you'll have acces.
just clean everything and spray with wd 40 and check the connection
if it's not that you'll have to look further under your arm rest
rens

Edited by rens914 on Sunday 11th October 08:03

[NCE 61]

Drivers door ECU is fuse No 32 (10 Amp). Alternative is the red emergency handle.

[infinity]

i have to add (since i was standing next to the car yesterday) that it does open the window, but does not unlock the door.

[mhardy]

Yesterday i checked the fuses and they were okee... remove the ECU Driversdoor connector and put it after 10 minutes back and everything works!!!

They all do that.......I love TVR's

M.

[rens914]

i believe that's not only TVR but simply britisch built cars
jaguar and lotus are also famous for this
i had about 16 sensors in my lotus. whenever one of them sensed a default the car would go on a limpcode (max 0,6 bar). stalling the car and firing it up again eraised the faulty code like nothing happened.
not nice when driving to the circuit with no problems and turning up for the first spin with limpcode. @#$%^&*())))F....ck, F....ck
rens

[mhardy]

and again........
yesterday no problem the driversdoor works fine....

Today i wanna go out and the door doesnt get open, even the window doesnt drop down. I Did the same thing as last week and put the driversdoor ecu connector off. Waiting 5min and put it back then the window goes up to the end and the door opens while the window was behind the A-style.( window complete up and door opens)

I had the door open and all went fine..close the door to test and i never get it open anymore!!!!! when i disconnect the door ECU the window sometime drops half sometimes it came complete up. But the door doesnt click open.

When i push the dooropen button i can hear a click at the door......

anybody?

Thanks
Matthijs