Mk 1 Pioneer Stereo – tape deck problem
Mk 1 Pioneer Stereo – tape deck problem
Author
Discussion

da_murphster

Original Poster:

1,053 posts

276 months

Wednesday 18th November 2009
quotequote all
I use my tape deck for an adaptor for my mp3 player.

All was good but recently during playback it ‘looses’ sound and then a couple of seconds later the display goes totally blank.

If I press the ‘source’ button the screen comes back on and it switches to radio/cd, if I press it again it goes back to tape, all is fine and it plays from the mp3 player again.

Then few minutes/seconds later exactly the same thing happens. Only pattern I can think of is it driving knocks affecting it.

I would really rather not change the headset yet as current setup matches car nicely and does me fine – would rather spend my pennies on speakers.

This happened to anyone else?

I have checked and cleaned the front fascia connectors – no difference.

da_murphster

Original Poster:

1,053 posts

276 months

Thursday 19th November 2009
quotequote all
Anyone any ideas?

Whitey

2,508 posts

313 months

Thursday 19th November 2009
quotequote all
would suggest the tape deck head needs adjusted. As it's a unit out job to do you may as well replace the head unit to a modern one anyway.

Whoever originally specced the car must have been a peasant...not upgrading the tape deck head unit to a CD player!!! smile

da_murphster

Original Poster:

1,053 posts

276 months

Thursday 19th November 2009
quotequote all
Grr....was hoping to avoid doing this - other stuff I would rather spend my time/money on.

Anyone recommend a headunit that 'fits in' with the Tuscan - I did like the way the standard one was matt silver with display that matched the cars.

Whitey

2,508 posts

313 months

Thursday 19th November 2009
quotequote all
actually just re read your post and it might just be a power fault. Loose connection at the back??