Discussion
Does anyone have any idea where I can get hold of a space saver spare wheel for my Tuscan. After watching top gear a couple of weeks ago when they changed the wheels on a chim chassis to the narrow wheels was wondering if anyone has any ideas where you can get hold of one. I do a lot of miles and long trips so would like to have one just in case. Have looked on the usual websites and ebay but nothing.
Cheers for the replies
G
Cheers for the replies
G
boardinscotland said:
Does anyone have any idea where I can get hold of a space saver spare wheel for my Tuscan. After watching top gear a couple of weeks ago when they changed the wheels on a chim chassis to the narrow wheels was wondering if anyone has any ideas where you can get hold of one. I do a lot of miles and long trips so would like to have one just in case. Have looked on the usual websites and ebay but nothing.
Cheers for the replies
G
OK lets start with the basics - whats the PCD on a Tuscan?Cheers for the replies
G
B'stard Child said:
boardinscotland said:
Does anyone have any idea where I can get hold of a space saver spare wheel for my Tuscan. After watching top gear a couple of weeks ago when they changed the wheels on a chim chassis to the narrow wheels was wondering if anyone has any ideas where you can get hold of one. I do a lot of miles and long trips so would like to have one just in case. Have looked on the usual websites and ebay but nothing.
Cheers for the replies
G
OK lets start with the basics - whats the PCD on a Tuscan?Cheers for the replies
G
Standard 18" spider rim width is 8.5". 4 1/2" PCD 5 studs (assuming the same for the Tuscan as the sag)
Offset for the front is 42mm and rear is 33mm
Wheel stud/nut size is 1/2" UNF torque to 76-85lbft.
Will have to measure mine again (as it is a Tuscan) but have had some wine and it is a tad baltic in Scotland here and I am being a big woos to go outside again.


G
Edited by boardinscotland on Thursday 3rd December 00:19
Edited by boardinscotland on Thursday 3rd December 00:20
rens914 said:
hey G
Will have to measure mine again (as it is a Tuscan) but have had some wine and it is a tad baltic in Scotland here and I am being a big woos to go outside again.

what the hell are you doing in scotland if you could live in warmer parts of the world
rens
Haha.Will have to measure mine again (as it is a Tuscan) but have had some wine and it is a tad baltic in Scotland here and I am being a big woos to go outside again.


what the hell are you doing in scotland if you could live in warmer parts of the world
rens
Yes a bit damp up here at the moment. Scotland has its moments though.
Ian (B'stard Child) have measured mine and also according to mytuscan website this is the sizes. 18" - 8.5 X 18, 5 X 114.3, ET 33 Rear, ET 42 Front. Spigot size I am not sure of. I think it might be 63mm but could someone confirm.
G
boardinscotland said:
Ian (B'stard Child) have measured mine and also according to mytuscan website this is the sizes. 18" - 8.5 X 18, 5 X 114.3, ET 33 Rear, ET 42 Front. Spigot size I am not sure of. I think it might be 63mm but could someone confirm.
OK well spigot size was gonna be my next question5 x 114.3 is J-tin spec so I'd be looking at Japaneese cars to donate the space saver rims
Recommended max speed limit for space savers is 50 mph and they are rarely the same rolling diameter as the std OE wheels so a slightly smaller overall diameter wouldn't hurt for temporary use but I'd be trying to keep the differential to a minimum
I had my LC stored over winter once on 4 space savers - drove it our of the garage and turned it round on the driver before putting it back the other way round - it wasn't fun!!
tuscan_al said:
72mm iirc, Jeep hubs, was my scuppering point when trying to get some jap rims on. Most jap is 58 mm or 62 mm at most. Guess as its a steely you could enlarge the hole.
Then a Jeep space saver would be what I'd be looking for 
http://cgi.ebay.co.uk/16-Jeep-Spacesaver_W0QQitemZ...
Edited by B'stard Child on Thursday 3rd December 22:24
Edited by B'stard Child on Thursday 3rd December 22:25
B'stard Child said:
R TOY said:
Mmmm nice. I might get a set of 4
I reckon you could have the most evil handling car that laid the longest thinest 11's in the world if my experience of driving on 4 space savers is anything to go by 
It would be a limp to a station fix. I wonder if anyone would be interested if we get enough people together that we could approach a manufacturer to make a one off set of wheel space savers kind of like the tuscan window clip situation.
G
Forums | Tuscan | Top of Page | What's New | My Stuff



